POST THE BEST FAQ TECH THREADS IN HERE

I made this chart when i was configuring gear ratios for my car

Speed and RPM table AUTOMATIC 3.08.1

RPM 2.84 1.56 1.00 0.70
500 4 8 12 17
1000 8 15 24 34
1500 13 23 36 52
2000 17 31 48 69
2500 21 39 60 86
3000 25 46 72 103
3500 30 54 84 120
4000 34 62 96 138
4500 38 70 108 155
5000 42 77 120 172
5500 47 85 133 189
6000 51 93 145 207
6500 55 100 157 224

RPM 2.84 1.56 1.00 0.70 AUTOMATIC 3.27.1
500 4 7 11 16
1000 8 15 23 32
1500 12 22 34 49
2000 16 29 45 65
2500 20 36 57 81
3000 24 44 68 97
3500 28 51 79 113
4000 32 58 91 130
4500 36 65 102 146
5000 40 73 113 162
5500 44 80 125 178
6000 48 87 136 195
6500 52 95 148 211

RPM 2.84 1.56 1.00 0.70 AUTOMATIC 3.55.1
500 4 7 10 15
1000 7 13 21 30
1500 11 20 31 45
2000 15 27 42 60
2500 18 33 52 75
3000 22 40 63 90
3500 26 47 73 105
4000 29 54 84 119
4500 33 60 94 134
5000 37 67 105 149
5500 40 74 115 164
6000 44 80 125 179
6500 48 87 136 194








RPM 2.84 1.56 1.00 0.70 AUTOMATIC 3.73.1
500 4 6 10 14
1000 7 13 20 28
1500 11 19 30 43
2000 14 26 40 57
2500 18 32 50 71
3000 21 38 60 85
3500 25 45 70 99
4000 28 51 80 114
4500 32 57 90 128
5000 35 64 99 142
5500 39 70 109 156
6000 42 77 119 171
6500 46 83 129 185


RPM 2.84 1.56 1.00 0.70 AUTOMATIC 4.10.1
500 3 6 9 13
1000 6 12 18 26
1500 10 17 27 39
2000 13 23 36 52
2500 16 29 45 65
3000 19 35 54 78
3500 22 41 63 90
4000 25 46 72 103
4500 29 52 81 116
5000 32 58 90 129
5500 35 64 100 142
6000 38 70 109 155
6500 41 75 118 168

Intake
(including CAI's, Plenums, Throttle Bodies and aftermarket Intakes)
Plenum and Throttle Body's

Plenum and Throttle Body showdown from MDLink Broken

Accufab 70mm vs. 75mm throttle body and plenum

Mass Air Sensors aka MAF's

Technical writeup on the mass airflow sensors from MDLink Broken

Cold air kits aka CAI's

Mac straight shot CAI thread page

does annyone have a 4.6 with 75mm tb and plenum?

























/

Calculators

TCI has some fun and useful calculators.

http://www.tciauto.com/tech_info/calculators.htm#12

Check them out.

Long Tube Header install by FNSweet.com

http://www.fnsweet.com/garage/lt_install/index.shtml

Plus bunch of other usefule How To's

http://www.fnsweet.com/garage/how-i-did-it.shtml

most of these links in this post are dead now.

rear end (diff) fluid comparisons:
http://www.performanceoiltechnology.com/Gear Lube White Paper.pdf

4.6 spark plug info:
http://www.crownvic.net/tech/sparkplugs101.htm

fuel filter change:
http://www.bullittarchive.com/1009.htm

Here is a good FAQ That I host for Mustangworld
http://www.svt4u2try.com/Mystuff/Mustang_FAQ/

PI Headswap Write-Up:

http://forums.stangnet.com/showthread.php?t=717166

Odometer gear replacement

http://forums.stangnet.com/showthread.php?t=605742

This thread saved my a$$. Great pictures and write up. Also shows where you can get a new gear. Ordered mine through that guy and got it in the mail a few days later.

www.mustanghowto.com

Weight Reduction

Weight Reduction Information

John

I wrote this a long time ago. All the links are broken, but when I get a chance I will try to find some place to host the files.
http://www.stangnet.com/mustang-forums/429117-how-install-your-own-gears.html


Apparently, at one point in time I knew some stuff. Now that I have stopped racing and visiting this board I must have gotten dumb
http://www.stangnet.com/mustang-forums/457056-everything-you-ever-wanted-know-about-gears.html
http://www.stangnet.com/mustang-forums/458814-everything-you-wanted-know-about-exhaust.html

I know I have posted more tech articles in the past, but the search only goes back to 2004.

How to remove stripped lugs / lugbolts / studs without damaging the mag

http://www.stangnet.com/mustang-forums/775878-how-polish-exhaust.html

I say that needs to be a sticky on here, I go to it often and if anyone has an IRS they should do this 1st.