rear suspension questions

[fford]

Ok, So I usually do my reasearch and pick what I want to do with the car. Last couple of years haven't put much into the car between beeing deployed and family and the 4 car garage addition
My signature is below, in addidtion I have the rectangular subs and an 8 point S&W cage and FMS alum drive shaft in the car. I also have the UPR tubular front suspension to bolt on yet and an HP stage 2 kit on order. Needless to say rear traction is sub par even with the factory five upper and lower control arms. I am looking for good strait line suspension set ups that work on the track and street. The car sees less than 5k miles a year on the street so I would compromise to the race end of the spectrum.

suggestions please

 

[fford]

btw I was looking at the MM torque arm/panhard rod set up with adjustable lower control arms.

 

[5LugFoxFanatic]

btw I was looking at the MM torque arm/panhard rod set up with adjustable lower control arms.

Well, what are you going to do mostly?

read MM LCA's make a huge difference as well as a panhard bar. I am missing the last part....the torque arm, but my car handles well. I don't care about drag racing at all so it's good enough for me.

 

[forced87GT]

btw I was looking at the MM torque arm/panhard rod set up with adjustable lower control arms.

Great setup!!!

I used to have HPM jr's upper and lowers, then decided to go a different route.
Going to the MM setup was a night and day difference in cornering and on take off.

If I had lots of money, I would put the same setup on my 92 vert!

 

[fford]

thanks for the vote on the MM set up, that is the kind of feedback I was looking for.

 

[Nova]

http://www.baselinesuspensions.com/index.htm

 

[PJC Racing]

Team Z Motorsports, Anti-rollbar and upper/lower control arms. You will not find better quality.