Removing Smog Pump

[Tayohs 95Gt]

im removing my smog pump and and i was wondering what belt sized belt i should use thanks

matt

 

[harley02]

With UD pullies it's gonna be 895K6. Basically that's an 89.5" belt

 

[Tayohs 95Gt]

With UD pullies it's gonna be 895K6. Basically that's an 89.5" belt

i dont have UD pullies at all just Stock.. or would it be the same still? thanks

 

[miller92063]

your signature says that you already have a smaller belt that is bypassing the smog?

 

[miller92063]

nevermind

 

[Tayohs 95Gt]

ok any one know the belt size? i need

 

[LethalInjection]

Don't know the size with stock pulleys right off hand, but you can get a piece of string and route it around like the belt is gonna go. Undo it, lay it on the ground, and measure it. You might wanna subtract .5 or so to take the tensioner into consideration.

 

[95Mustang302]

It depends, I have a really weird size because I run a stock water pump pulley, but underdrive crank and alt pulley

 

[racer5.0stang]

Since this is a mechanical pump, is there a setting in the computer that says this amount of air is coming in?

And if so, is there a chip that changes or eliminates this setting?

 

[Nagash01WS6]

Since this is a mechanical pump, is there a setting in the computer that says this amount of air is coming in?

And if so, is there a chip that changes or eliminates this setting?

Wrong thread?

 

[a50sn95]

Since this is a mechanical pump, is there a setting in the computer that says this amount of air is coming in?

And if so, is there a chip that changes or eliminates this setting?

No, The pump does not add air to the combustion chamber, it adds it after. The holes in the back of the head run to the exhaust port, and the other set of lines run to the converters. The computer does not use this at all.
The only issue is getting codes for the system not being there (TAD/TAM,I think), but those
can be turned off with a chip