SBC Rods in a 351w??? 2.100 Std. rod journal.

Discussion in 'Fox 5.0 Mustang Tech' started by Xtreme Limits, Dec 5, 2003.

  1. Xtreme Limits

    Founding Member

    Joined:
    Nov 30, 2001
    Messages:
    391
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Hudson, Florida
    I have a set of 6" sbc H-beam rods and a while ago i thought i read you could put them in a 351w but i cant find it now.
    Im building a 351w .30, what off the shelf crank (or can the stock one be cut down), and what pistons? help :(
     
    #1
  2. Rick 91GT

    SN Certified Technician Site Sponsor

    Joined:
    Nov 30, 1999
    Messages:
    9,702
    Albums:
    1
    Likes Received:
    94
    Trophy Points:
    99
    Location:
    PA
    I believe I have seen a guy using a 6" rod before (www.corral.net), a lot of 408-418 kits use a 4" stroke crank, with 2.10" rod journals this helps with some of the oiling issues a 351W has, they use a 6.125, 6.20, 6.25.

    One issue may be the radius on the rod journal, most stroker cranks have a certain radius that needs to match. What brand is the rod? If your interested in a full kit let me know I can help you... [email protected]
     
    #2

Share This Page