Its not a filter its just like the filler neck tube open and connected to tbI don't think you can put a breather on valve cover. I think it messes with the pcv valve or something. I read about it somewhere but can't remember all the details. Someone smarter than me can provide answer to that.
Edit: I just noticed you don't have the valve covers with filler neck. You already have a filter installed in back of passenger side valve cover. I would imagine if that's working then all you need to do is plug off the TB and call it a day.
Ok so my pcv is hooked in the back top of lower intake to upper intake?,do i just run a tube with no pcv valve?,or plug it?,then just put open breather on valve cover?
It's either all in or nothing with the pcv you shouldn't run the breather and pcv together . I am plugged with breathers on my vc . You must delete the line that goes from the throttle body to the valve cover or else it would be pressurizing the crankcase whether you run the pcv or not . The design of the systemax which I have read many other have the same issue makes the pcv draw oil into the intake path like a siv which is why I chose to plug it off and run open breathers.
Sent from my iPhone using my fingers while my auto correct makes me seem illiterate
Thanks im learning here...lol
Edit: just read it again and you already said you plugged it,so open breathers both sides then right?
Last edited: