So, I'm getting ready to order some custom HVAC and ash tray plates from Gaugeplates.com. They make some really cool stuff over there. I proposed a layout, and I'm just curious what you guys think and how you would do things differently. Here's what I proposed...
The HVAC plate will have my 'dummy' lights on the left side, a PLX wideband in the middle, and a PLX boost gauge on the right. The cool thing about the boost gauge is that the gauge itself is a multi-gauge, so it will also display the oil pressure and I can toggle between the two displays. The head unit will be in the middle, and the HVAC controls on the bottom. For what it's worth, I'm doing Auto-meter gauges in the stock cluster with voltage, water temp, fuel pressure (electric), and fuel level.
The ash tray will have the two stages for the boost controller, the momentary switch for the line lock, and the on/off switch for the possible future methanol injection. There will also be a 3.5mm jack for the option of hooking up an ipod or phone to the stereo. I will probably never use it because I plan to get a head unit with SD card capability, but I figured it would be a good thing to have just incase.
Any suggestions on things to change or rearrange?