what tires for 18x9's on a fox?

[GSP393]

I did a search and couldn't find it so I appologize if this has been asked already.

I'm looking at some 18x9's and was wondering what tires I should run front and back and how much lower than stock can I go for springs? I haven't started my 5 lug swap yet, I know I'll need sn95 spindles and I'm gonna build a strong 8.8.

Thanks in advance.

 

[RS200]

Tires - 235/40ZR18 front, 255/40ZR18 back. Springs you should be able to get away with a slight drop, but I don't know how much exactly.

Budget way to do it? Pair of (I think) driver's side Ranger axles or passenger's side Aerostar axles, the drums from that vehicle, and Ford Racing's 5 lug front rotor kit. All you need.

 

[GTOreturns]

Thats alot of tire! Expect some rubbing issue's when turning the steering wheel all the way!

 

[mineralgsvt]

I run 275/35/18 on 18x9 with 24mm offset on the rear of my '89.. flipped quads, fox length axles.. I run 8" wide on the front with a 235/40

 

[GSP393]

I run 275/35/18 on 18x9 with 24mm offset on the rear of my '89.. flipped quads, fox length axles.. I run 8" wide on the front with a 235/40

Are you using stock springs?

I'm already planning an 8.8 build up with 31 spline axles, 410 gear and a detroit locker or something comparable.

 

[GSP393]

The wheels I'm planning are only made in 18x9, would 9's work in the front?

Thanks for the help.

 

[mineralgsvt]

Are you using stock springs?

I'm already planning an 8.8 build up with 31 spline axles, 410 gear and a detroit locker or something comparable.

Nope.. they are Saleen Racecraft springs (very similar to Eibach Pro-kit, if not the same) with Kenny Brown trackit brackets (lowers the control arm munting point about 1/2")

 

[RS200]

I'm running 18x9s with Nitto NT555 235/40ZR18s all around no problem (except for rubbing against the swaybar at absolute full lock). The 255 will fit out back, but I didn't get them because it was easier and cheaper to get a matched set.