Which sparkplugs?

[bqd05]

I have a pretty stock setup, with a blaster coil. I currently running Bosch Plat. plugs, but I've heard thoose arn't the best thing to have in. What do you all think?

 

[AznStanger3v]

Autolite 25s are what i use. i need new ones seeing how my manifold swap fouled them up horribly when i was trying to set the timing and fix my janx

 

[bqd05]

autolite 25? the Platinum or the Resistor...

 

[AznStanger3v]

autolite 25? the Platinum or the Resistor...

plat

 

[VibrantRedGT]

Autolite 25's with a .054 gap.

 

[HISSIN50]

*some* folks have had issues with platinum plugs. main problems are that the idle is a little low and high rpm misses (above 4K).

i did say SOME people, so no wars please. platinum is very hard compared to copper. it does not conduct nearly as well as copper, but does not suffer gap erosion as quickly as plats do.

plats are nice for cars that are a pain to do plugs on (think camaros).

just my two cents worth.

 

[stng94]

Autolite's

 

[Venom351R]

Autolite 24's

 

[94TURBO5 O]

I currently running Bosch Plat. plugs, but I've heard thoose arn't the best thing to have in. What do you all think?

Take those plugs out and throw them mofos as far as you can!
Like everyone has said AL-25's or a step colder 24's if you ping.