winter time additions to my stang.....opinions

[jaidedeye]

well in a few weeks im gonna be purchasing this stuff for my stang.

BBK ceramic shorty headers
BBK catted X pipe
trick flow stage 1 cam
trick flow street heat intake manifold
pro-m bullet mass air meter
dynomax race bullets
transgo shift kit


im replacing some of the things on my set up like the cam because of emissions and i want some of my low end back. and the other things should help me out...i have a stout @ss bottom end and good heads already....

 

[FrdMustangCpe]

sounds good. good luck with the mods.

 

[jaidedeye]

thanks....i know my car will end up running alot better. just the trick flow manifold will make a difference seens how i run 12.90's with the stock one.

 

[FrdMustangCpe]

just the trick flow manifold will make a difference seens how i run 12.90's with the stock one.

damn, 12.9s, that intake should free you up a good amount.

 

[jaidedeye]

hope so

 

[90mustangGT]

Since you are doing the headers and midpipe, why not step up to longtubes?

 

[GRGT1994]

I was gonna ask the same thing. Go with long tubes.

 

[jaidedeye]

long tubes eh? dont i have to lift the motor? what about my suspension? my car is lowered almost 2 inches

 

[TT91]

SSGT, Iv got some longtubes for sale if your interested..
Ill give u the "military Discount"...let me know

 

[tmoss]

Sarge - you don't list your current intake - stock?

sirsureshot - why the header wrap on what appears to be ceramic coated headers?

 

[Michael Yount]

"why the header wrap on what appears to be ceramic coated headers?"

I'm curious too....perhaps it's just hi-temp silver paint.

 

[Chris6050]

Jaidedeye, if you want some of the low end back, install the TFS 1 cam 4* advanced. A friend of mine has that cam and it is a little sluggish on the bottom end. I have mine advanced and it rips. Didn't notice any loss in bottom end.

 

[Nottoofast50]

how's the topend on it with it advanced?

 

[Chris6050]

Top end is great. Advancing the cam didn't effect it at all. My sotp meter gives it 2 thumbs up.

 

[Michael Yount]

Chris - is your buddy's set up other than cam install identical to yours? Relatively minor differences in components can make a cam/install behave significantly differently in one set up than another.

 

[Chris6050]

He's got a GT-40 intake and a Pro-M 75 mass air. Other than that they're the same

 

[jaidedeye]

yeah i have the stock intake right now......


sirsureshot39.....how much for the headers??? and will they drag? i have a 2 inch drop in my suspension..

 

[tmoss]

yeah i have the stock intake right now.......

Ouch, but your fixin that.

 

[jaidedeye]

oh yeah...i know the intake is bottlenecking me. not for long though!!!!!!