Search results

Thanks Guys, I will be checking the valve body to see if it is sticking. I get the same reading (above 10 PSI) at idle when in neutral.

Yeah, the good thing is having too much pressure is better than no pressure. But why at idle, it should be close to 0psi and it just shoots up. As far as a bad valve body, I am just trying to understand what symptoms occur when one goes bad. Thanks guys, I appreciate the help.

Hi Guys, I just did a AOD swap on my 67 mustang and have installed the T.V. cable and have it installed on the tranny top dead center (Idle). Well, as soon as I start the car, the vacumn pressure shoots up to like 10 psi (Gauge 0-10 psi). It is suppose to be at 0-3 psi at idle. The...

Hi Guys, I would really appreciate some advice and input for people who have completed an AOD swap in a 67 mustang. Everything is completed with the exception of the fianl adjustments to the T.V. cable. I just want to make sure I installed the following items correctly. The T.V. cable...

HI Guys, I am doing an AOD swap and will be splicing the existing NSS to connect to an aftermarket Shifter. The existing two prong (trailer type) switch has a black wire and a blue wire. I just want to make sure that I connect them correctly. The AOD has a four prong switch that I need to...

Hi Guys, I am doing the C4 to AOD swap in my 67 mustang and am running a Holley 600 carb. Can someone please tell me what the part number is for the T.V. bracket that installs on the Holley to get the correct geometry with the throttle. Any help would be appreciated. Thank you, :flag:

Guys, I have been researching the site for a list of LT headers to bolt up. I had some Hooker Comps with the C4 but since the AOD install, they no longer fit (passenger side) and have decided to go with something else or shoud I just modify the hooker comps? I have read about the Hedman...

Hi Guys, I just purchased the TCI Street Fighter AOD shifter for my AOD. Has anyone installed this shifter without the Ford AOD Installation Kit (TCI Part No. 618016) . Any help would be appreciated. Also I know B&M makes a similiar installation kit for the AOD Tranny and was wondering if it is...

Hi Guys, Can anyone tell me the size (length) of the bolts that connect the AOD to the engine block. I upgraded my 67 mustang with a 1991 AOD but need to know the correct length of the bolts. Thank you. :flag:

Hi Guys, Well I just purchased a Shelby stlye fiberglass decklid and end caps and am at the point of trying to make them fit (fiberglass?). I would really appreciate if people who have completed the installation can post some pics so I can get a sense of reference. Pics of you looking at...

Hi Guys, I have heard good things about their Fiberglass Shelby Hoods and Scoops but would appreciate some real experience with them. All companies say they are top quality and fit like a glove. It has been my experience that it is not until you get your hands dirty and test fit do you...

Hi Guys, Does anyone know if they now make aftermarket Shelby Headlights that are both (combined) High & Low Beams? I know that shelby's come with seperate High and Low beam lamps but I thought that someone would have invented a combination one. Thanks in advance for the help.

Overheating Thanks guys for the great advice, I really appreciate it. It turns out the Fan Clutch is going out. Hardly any tension after running it and getting it hot. Replaced it and will see how it runs. :flag:

Hi Guys, I just bought an 1985 GT and I have noticed it the temperature tends to climb and climb while driving through City traffic (Signals, stop signs). I tried to run the car without a Thermostat and that did not solve or tell me the Thermo. was bad. The hoses and radiator are in good...

Actually, I noticed that the coolant was really not flowing once the thermostat (180 degree) opened and I did a power flush of the water jackets. I think that did the trick. Took her for a test drive (20 minutes) and never got over 200. I want to thank everyone for their comments and...

Well guys, I had the radiator inspected/cleaned and the shop told me that their was nothing wrong with it. Therfore, I have eliminated the following suspects? Water Pump Thermostat Upper/Lower Radiator Hoses Temp Sending Unit to Autometer gauge ECT Switch Lower air dam...

Yeah, I though about that lower rad. hose and replaced it with the one you described, with the coil on the inside. Thanks.

Thanks for the suggestion, I also checked that and it seems to be in pretty good condition (no cracks/Warps). That is another thing I can pretty much elminate from the problem.

Guys, I am stumped at the fact that my car tends to overheat (temp keeps rising) while going 70 on the freeway (Under Load). My car is stock factory with the exception of an Aluminum Rad. My cooling system (Water Pump / Heater Core Bypass/ 180 Degree Therm. / New Upper & Lower Hoses / Stock...

Hi Guys, I would really appreciate some assistence. I need to get the dimensions for the width (en dto end) and length (waterfall to back) of the Hard tonneau cover that Saleen Convertibles use. I am customizing a 1967 mustang and would like to make a tonneau cover for it. Thank you in...