clutch cable

  1. L

    Need Help with Clutch/Cable

    Hello I'm new to the forum so go easy on me. Just wanted some input from someone who knows more than me. Ok so here's a bit history on the car what I know so far. It a 92 fox body 5.0 originally an Automatic converted to a 5 speed. I believe it has a T5 in it now. The car ever since I bought...
  2. M

    Drivetrain Weird clutch disengagement issue

    So I just got the beast back on the road, I have a freshly rebuilt T5 installed, as well as an exedy stage 1 clutch and a FRPP new flywheel. I made sure every bolt was torqued and loctited, and spent a few tries getting the clutch cable adjusted juuuuuust right. I'm still being gentle with...
  3. jricolcol

    Clutch Cable Installed Incorrectly

    Greetings, I had my clutch cable replaced and when my GT was due for its oil change I noticed that the cable was pretty pushed up against the oil filter. It took some force (but not a large amount) to move the cable in order to change the filter; either way it didn't feel right. Do you think...
  4. W

    Still won’t go into gear after replacing 2 parts

    Thanks for taking the time for anyone who does. I’ll cut to the chase. I have a 2003 mustang gt with the 5-speed manual. I just recently replaced my throw out bearing which seemed to go just fine. After the job it drove fine for one whole day, then it became hard to get into gear. Long story...
  5. M

    SN95 Rusted clutch cable = clutch squeak when pedal up?

    I had my clutch done a while back. It was sounding horrible, screaming on pedal down. Definitely much better since but now there's a chirp only when the pedal's up. I took a look underneath and the clutch cable is bursting with rust. Any chance this can be the cause? I'm hoping I can...
  6. Sheep Dowg

    Gt40p Blues Stuck In Da Stable.

    Greeting Stangnet, This is my first thread ever. I feel like I’m posting wrong because there is lots of GT40P info in here. So here goes. My Stalions a 68 Coup, 90EFI, newly machined GT40P Heads, T-5 tranny with newly installed clutch cable. I didn’t do my resurch well enough as I have newly...
  7. O

    Drivetrain 1999 Gt Clutch Release Moving Back To The Top After Just Recently Adjusting.

    Just recently bought my GT and the clutch has been my biggest complaint so far. It released near the top when I bought it, so me and my dad adjusted it to release towards the middle. It held there for about two weeks or so but seems to be releasing back at the very top again. The clutch doesn't...
  8. 1

    Need Help Shifting Problem

    I just got a 1990 fifty less then a week ago and my 3rd and 4th gear won't engage like if it's on nuatrual but my other gears will go catch. And when I hard shift 1st and 2ND won't go in it will grind but if I shift it soft it goes in there with Lil grind 5th ND reverse goes in smooth with no...
  9. Mustang Clutch Installation (79-04 Fox Body & SN95)

    Mustang Clutch Installation (79-04 Fox Body & SN95)

    Mustang Clutches, Flywheels & Accessories - See Them Here: http://www.latemodelrestoration.com/products/Mustang-Driveline Is the clutch in your Fox Body or SN95 Mustang slipping or making some awful noises? Then it is time to tackle the Mustang clutch replacement project! With the help of...