Expired 1969 1970 Mustang Fold Down Rear Seat $1,000

TannerMN

New Member
Jul 27, 2017
2
1
1
36
MN
I recently purchased a 1969 Mustang Mach 1 and the prior owner (of 30 years!) still had the optional fold down rear seat. I am not an expert in these, but have read a bit about them and looked online and know that originals are worth quite a bit. I have latches and several pieces but have not attempted to install it so I cannot confirm that this is 100% complete, so for that, it is being sold "As-Is." I didn't spend a lot of time cleaning it up before posting, but it appears to be in pretty good shape. The carpet looks better in person, the flash didn't help the picture. I vacuumed it but it could use a more thorough cleaning. The side and upper panels are not cracked or damaged but may need some cleaning and touch up paint. Chrome is good, but not perfect. For reference, NPD sells a reproduction of the main core piece for $1,200 and that is without any latches and panels. I am looking to use the funds from this to purchase other parts for my Mustang. I am not looking for trades except potentially Magnum 500 rims (original or reproduction). PRICE REDUCED $800 or best offer. Due to size, I am not looking to bother with shipping right now.
Location: Minneapolis-St. Paul, MN
 

Attachments

Last edited:
  • Like
Reactions: Glenn68
  • Sponsors(?)


Glenn68

New Member
Dec 19, 2017
2
0
1
60
I recently purchased a 1969 Mustang Mach 1 and the prior owner (of 30 years!) still had the optional fold down rear seat. I am not an expert in these, but have read a bit about them and looked online and know that originals are worth quite a bit. I have latches and several pieces but have not attempted to install it so I cannot confirm that this is 100% complete, so for that, it is being sold "As-Is." I didn't spend a lot of time cleaning it up before posting, but it appears to be in pretty good shape. The carpet looks better in person, the flash didn't help the picture. I vacuumed it but it could use a more thorough cleaning. The side and upper panels are not cracked or damaged but may need some cleaning and touch up paint. Chrome is good, but not perfect. For reference, NPD sells a reproduction of the main core piece for $1,200 and that is without any latches and panels. I am looking to use the funds from this to purchase other parts for my Mustang. I am not looking for trades except potentially Magnum 500 rims (original or reproduction). PRICE REDUCED $800 or best offer. Due to size, I am not looking to bother with shipping right now.
Location: Minneapolis-St. Paul, MN
I would like to know if you still have rear fold down seat assembly
 
Thread starter Similar threads Forum Replies Date
Saberdemon For Sale 1969-1970 mustang hood Interior Exterior Parts 0
MoDriver SOLD 1965-1966 & 1969-1970 Ford Mustang Exterior Door Handle Kit Interior Exterior Parts 0
rusty428cj 1969 Mustang Race Car That I Have Owned Since 1970 Classic Mustang Specific Tech 16
jerry S Will a rim blow wheel from a 1970 mustang fit a 1969 mustang? Classic Mustang Specific Tech 8
T Help mounting 1970 mustang disc brakes on a 1969 ford mustang Classic Mustang Specific Tech 14
R 1969 - 1970 Mustang Mach I Parts Engine and Power Adder 1
69Rcode_Mach1 1969-1970 Mustangs lets see your T5's!! Classic Mustang Specific Tech 5
G Expired 1969 And 1970 Tail Light Panel Interior Exterior Parts 2
B Refinishing 1969/1970 Shelby Wheels 1965 - 1973 Classic Mustangs -General/Talk- 1
S Expired 1969 - 1970 Shelby Front Bumper Rubber Shield Set Interior Exterior Parts 2
P Pictures of 1969/1970 Cowl Removed? 1965 - 1973 Classic Mustangs -General/Talk- 0
Taranis 1969 vs. 1970 Spindles Classic Mustang Specific Tech 17
SeventyMach1 1969 & 1970 Fastback's 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
F 1967, 1968, 1969, and 1970 Shelby Clone Help 1965 - 1973 Classic Mustangs -General/Talk- 2
YadiStang 1969 mustang. Need help with door lock actuator rod 1965 - 1973 Classic Mustangs -General/Talk- 0
M 1969 mustang 302 clevor breaking up at high rpm 1965 - 1973 Classic Mustangs -General/Talk- 4
R 1969 mustang headlight upgrade wiring kit 1965 - 1973 Classic Mustangs -General/Talk- 0
6 Budget 1969 mustang rear end build 1965 - 1973 Classic Mustangs -General/Talk- 1
S Should I mod the 302 or run the 390? 1965 - 1973 Classic Mustangs -General/Talk- 35
YadiStang Need help with my 1969 oil dipstick 1965 - 1973 Classic Mustangs -General/Talk- 8
R 1969 mustang heater core 1965 - 1973 Classic Mustangs -General/Talk- 4
W 1969 c4 tranny Classic Mustang Specific Tech 0
R 302 to 347 Stroker 1965 - 1973 Classic Mustangs -General/Talk- 3
6 Will GT-40 heads fit a 1969 302? 1965 - 1973 Classic Mustangs -General/Talk- 7
G Floor & Chassis measurements for a 1969 sportsroof, Getting conflicting info on the web Classic Mustang Specific Tech 0
YadiStang Speedmaster Shaker Setup for 1969 - experience? 1965 - 1973 Classic Mustangs -General/Talk- 0
C 1969 mustang not charging the battery Classic Mustang Specific Tech 3
J 1969 mustang ignition problem please help Classic Mustang Specific Tech 3
YadiStang And one more (under hood) question for 1969 Base Mustang 1965 - 1973 Classic Mustangs -General/Talk- 0
YadiStang 1969 Base Mustang (under hood) Question 1965 - 1973 Classic Mustangs -General/Talk- 4
G 1969 Mustang owners Classic Mustang Specific Tech 6
G 1969 heater blower power connection Classic Mustang Specific Tech 1
J 1969 302 intake fit a 1973 302 1965 - 1973 Classic Mustangs -General/Talk- 2
O 1969 351 W convert to shaker 1965 - 1973 Classic Mustangs -General/Talk- 1
C 1969 Ford Mustang 302 small block V8 Classic Mustang Specific Tech 1
D 1969 Convertible measurements 1965 - 1973 Classic Mustangs -General/Talk- 1
M 1969 Mustang Grandé Trunk interior 1965 - 1973 Classic Mustangs -General/Talk- 2
6 Can I run 245/45/17 and 275/45/17 on a 1969 mustang with altered suspension 1965 - 1973 Classic Mustangs -General/Talk- 0
R 1969 302 pushrod length Classic Mustang Specific Tech 0
T 1969 AC switch wiring Help 1965 - 1973 Classic Mustangs -General/Talk- 2
xxsurvivalism 1969 Coupe Build 1965 - 1973 Classic Mustangs -General/Talk- 0
mustangmike6996 1969 Mustang Seats/1971+ Classic Mustang Specific Tech 1
C Valve cover leak bra..... 1965 - 1973 Classic Mustangs -General/Talk- 2
R will rebuilding my steering box make turning easier 1965 - 1973 Classic Mustangs -General/Talk- 1
S Progress Thread 1969 Mustang coupe 1965 - 1973 Classic Mustangs -General/Talk- 13
4 1969 428CJ Mach 1 Q Code 4spd (close ratio) w/38k miles 1965 - 1973 Classic Mustangs -General/Talk- 6
C Wheel/Tire Advice New member almost finishing 1969 Mach 1 . . . again 1965 - 1973 Classic Mustangs -General/Talk- 1
S Progress Thread 1969 Mach 1 Q code 428 1965 - 1973 Classic Mustangs -General/Talk- 3
1320nut 1969 Mach 1 steering column Classic Mustang Specific Tech 0
R Electrical 1969 Mach1 battery/electrical issues Classic Mustang Specific Tech 2
Similar threads