OK here goes. Yesterday, I was datalogging with the AC running to see if I needed to make changes to the Injector Offset vs Battery voltage. What I noticed in my datalogged is when I turned the AC on the KAMs immediately went above 1 or became leaner. When I turned the AC off the KAMs immediately dropped back to normal (at an idle). So now I think I see the connection between battery voltage and the injector offset. It seems that with the AC on the battery voltage drops and the injectors pulse less, which equal less fuel to air ration and causes a lean condition and vice versa. Now what puzzled me is that when I open the datalog in EA, EA recommended very minimal changes, which the Tweecer will not take - it just reverts back to the stock numbers.
Also, I datalogged with all accessories on and yet still EA still suggested minimal changes. So should I believe that the stock figures are best for my tune?
Help me. Am I understanding this correctly or I am off in left field.
Thanks for any help
Also, I datalogged with all accessories on and yet still EA still suggested minimal changes. So should I believe that the stock figures are best for my tune?
Help me. Am I understanding this correctly or I am off in left field.
Thanks for any help