hey guys its been about a year since my last post and i got a new toy. i just built a 351w bored to a 357 it has 10.5:1 forged pistons stock rods and crank 1.6 roller rockers
the cam i chose is a crane solid lifter 597. lift at 112* lobe seperation and i cannot at thsi time recall the duration but anyway. i putit all together and it has no balls at low end and it acts like its running outa fuel on the top end athough the FPR says 7psi
i will probably spray a 150 shot on it occasionaly at the track but i want to be able to cruise it on the weekends and will be installing a 4:10 to 4:30 gear.the tranny is a art carr aod with an 8in converter set to stall at 3000
does anyone have any idea what cam i should be looking at also i am running a 780 carb with mech. secondaries that i want to replace with demon any suggestion would help thanks guys. i am looking for 450 at the wheels when i am done without spraying.
the cam i chose is a crane solid lifter 597. lift at 112* lobe seperation and i cannot at thsi time recall the duration but anyway. i putit all together and it has no balls at low end and it acts like its running outa fuel on the top end athough the FPR says 7psi
i will probably spray a 150 shot on it occasionaly at the track but i want to be able to cruise it on the weekends and will be installing a 4:10 to 4:30 gear.the tranny is a art carr aod with an 8in converter set to stall at 3000
does anyone have any idea what cam i should be looking at also i am running a 780 carb with mech. secondaries that i want to replace with demon any suggestion would help thanks guys. i am looking for 450 at the wheels when i am done without spraying.