Build Thread Dusty's...Tried to make big thing happen....

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,934
14,191
234
62
Birmingham, al
m.imdb.com
Why do yall give me ideas.....why why why ?

I started out picking up some fabric type easy wire loom from DEI at the local parts store and ended up doing this...

20190218_205719.jpg


After a couple years I finally tucked the passenger side. I had a rubber grommet laying around and put it to good use. I was surprised that the MAF plug fit through the round hole on the back of the strut tower. Some other things surprised me too....

20190218_204400.jpg


20190218_213620.jpg


20190218_213613.jpg


....now I'm sitting here thinking that I'm real close to tagging this car....I mean real close. Thought all my big purchases were done and I was just messin' around with simple cosmetic crap.

Well....no.... I'm not. The wire tuck revealed that I have actual shaft play in my strut... ...and the bump steer kit has play. How I missed this crap I have no idea. Maybe it was because i felt the car tram lining ...and heard noise over there and just ignored it.... its just the charge pipe...

Or maybe I'm an idiot...

Either way, I now need to order coil overs and a new bump steer kit. This stuff never stops. If im going coil over I might as well order tubular lower control arms. There goes my tag and title money.

To top this off I had a guy that was selling brand new Viking adjustable struts with brand new coil overs for 350. This was just week before last. His stuff was brand new in the box and I passed on it. I had the money but thought there was nothing wrong with the crap I have on the car. The bump steer kit is about 8 years old and driven daily for a few of those years. The struts are 8 year old cheapy monroe struts that were also driven daily for a few years under my convertible. There goes another grand...oh...and I'm buying an Integra for my son this week....and the wife just talked me into a new sectional sofa ( also being bought this week )....and I haven't filed my taxes yet so I have no idea what I owe them yet...but I know I'll owe something.... aaaaarrrrgggghhhh who said I wanted to adult ? I'm a freakin' Toys R Us kid

I DON'T WANNA GROW UP....WAAAHHH !!!!!!!:cry::cry::cry:
Take heart....a bucket of soapy water is almost free,..and there's got to be an old scrub brush laying around somewhere I'd think....With some effort and a little " me time", You can have an almost new looking inner fender well for free.

( I mean it'd be such a shame to put all of that new sht you're talking about on the car in the middle of all of that dirt.)

I mean if we're to blame for given you ideas,...there's at least gotta be one example of a clean, detailed, inner fender out there that you can blame for that too.:banana:
 
  • Surprised
Reactions: General karthief
  • Sponsors(?)


02 281 GT

Agreed...My wife has great Boobs
10 Year Member
Feb 3, 2009
2,227
1,358
174
Cabot, AR
I wonder if there is any difference between that loom you bought at the parts store and the electronics stuff I see on Amazon?
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
CarMicheal Angelo There is a reason my car is named " Dusty ". I scrubbed all this stuff a while ago.. about the time I installed the breather tank. Its covered in super fine Indiana dust....probably why the car has no rust.

When its finally together and the way I want it mechanically it'll all get torn down and stripped out. The under body and inner fenders will be painted and the car will be ding-less and painted. Everything is getting painted, coated, or polished.

Ever wonder why there is no mention of adding any new bits and pieces to the interior yet, Mike ? It's because it's all coming back out....everything. it'll probably take me 5 more years but, if you're still watchin' , you'll see it all.
 
  • Like
Reactions: RaggedGT

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
I wonder if there is any difference between that loom you bought at the parts store and the electronics stuff I see on Amazon?
Not sure...this stuff is supposed to withstand 500° and cost 27 bucks for 20ft. It says its 3/8 but my harness was about 9/16 and it covered completely. Its split down the middle and curls around the wires. Very flexible.
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Been busy working on customers cars. This veloster got CAI, intercooler W/ hot & cold piping, new fuel pump, tubular crash bar, braided upgraded line to the high pressure pump, and map sandwich plate.

20190224_210748.jpg


I got paid and his old CAI and Synapse BOV. Things keep leading me into the deep hole of modifying the 19 ecoboost.

I must resist....
 
Last edited:

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Got this stuff in the mail. It's a bump steer kit, seat belt hole covers, and an ash tray repair kit. Ordered new struts that should be in store Sunday.

20190226_211038.jpg


These things are a PITA. Just to let everyone know the coupe and convertible take the same covers.

....and, Mike , I finally installed an interior part. If you look close you can see the Indiana dust behind the panels. I had them removed and cleaned behind them when I had the entire interior apart and out. Don't fret, it'll all be cleaned...again. There's some painting in my future, too.

The bottom tabs broke on both pieces trying to get them seated. Probably had something to do with the low temps in the garage. They fit anyways though. I'm happy with them. They are in there tight as hell.

20190226_212230.jpg


20190226_212326.jpg


The ash tray will wait until I do the e brake recall repair.
 

Davedacarpainter

I think I've messed my pants
SN Certified Technician
Nov 28, 2015
11,951
11,465
193
58
Discordia
Been busy working on customers cars. This veloster got CAI, intercooler W/ hot & cold piping, new fuel pump, tubular crash bar, braided upgraded line to the high pressure pump, and map sandwich plate.

20190224_210748.jpg


I got paid and his old CAI and Synapse BOV. Things keep leading me into the deep hole of modifying the 19 ecoboost.

I must resist....
Bwaahaahaahaa!
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Up to my old tricks with hose clamps. A little heat shrink goes a long way.

20190302_212650.jpg


Can barely see the clamp up by the throttle body now.

20190302_215923.jpg


Went to the Pick A Part and found a 99 explorer v8. Man, I tore into that thing to get at the fuel rails. My fuel rails are a little rusty and I wanted replacements. Got the upper intake off and it had a built in fuel pressure regulator. I thought all of Fords regulators were 2 or 3 bolt. Nope....not this POS. Wasted about an hour trying to get to it. Complete waste of time.

Guess I'll just buy some aftermarket fuel rails...probably Aeromotive....or BBK. I really need to run new feed and return lines anyway one day. I'd much rather have too much fuel in the rails than not enough.
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Story time...

A bunch of years ago I went to mustang week myrtle beach. The girlfriend ( now wife ) had a business function in Greenville, NC for a couple days. We stayed there first for a couple days before heading to SC. While there I was bored out of my mind. My 89 convertible was looking all purdy with its fresh svo blue pearl paint job.

However, the worn old Strange struts were shot. Felt every little bump on the road. The IRS springs were way too soft and caused the car to bottom out in the rear...and the tire brands didn't match front to rear.

One hot summer day I rollz up to O'Reilly's and bought jack stands, struts, shocks, and spring spacers. The guy came out of the store and saw me on the side with my car on the 4 jack stands wonderin' what the hell I was doin'. We talked a bit and I told him I'd only be about an hour. He told me if I was done in an hour he'd let me get a refund on the jack stands....

Needless to say, I got it done with a few minutes to spare. He refunded the money for the stands. I drove over to a tire shop and bought 4 tires and got an alignment.

I remember telling the guys not to use my ebrake...but they did anyways. Man was that tech scared when the back wheels were locked up. Lol. I didn't have return springs on the rear calipers. To release them you had to stick a screw driver back there and pry the e brake cam. Almost scared them into giving me the alignment for free...but they were all way too cool for that.

This UPR bump steer kit came from the first trip to MW Myrtle Beach....where I met Mike with his red throwback mustang coupe. Me and Carmicheal Angelo talked for at least an hour or so that day. ( he don't remember none of it...that old coot. Lol )

These struts carried me through a lot of pot holes....blizzards....trips to the track....even took a ride over a curb with Dusty. I'll miss these old cheap struts. It was great but sometimes ya jus' have to move on.

20190303_145241.jpg


If you notice the new bump steer ends are on the old bump steer kit. That's because the UPR kit end is way longer allowing for more adjustment. The threads on the outer heims joint are also reverse thread which simplified adjustment. With the new kit I have to turn the inner tie rod to adjust. With the old UPR all you had to do was loosen the nuts and turn the blue aluminum body. Not a big deal.

20190303_123033.jpg


Car is back down on the ground and everything is installed.

20190303_143430.jpg


I installed the OEspectrum Monro struts. I want to do coil overs and adjustable struts but the budget wouldn't allow it yet. Kinda caught me off guard when I went to tuck the passenger side. No way I could leave it the way it was.

There's no more play in the struts or bump steer kit....I'm happy.

I found these and will be installing to keep dirt out of the heims joints. Should help them live a little longer.

Screenshot_20190226-215350_Chrome.jpg
 
Last edited:

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,934
14,191
234
62
Birmingham, al
m.imdb.com
Story time...

A bunch of years ago I went to mustang week myrtle beach. The girlfriend ( now wife ) had a business function in Greenville, NC for a couple days. We stayed there first for a couple days before heading to SC. While there I was bored out of my mind. My 89 convertible was looking all purdy with its fresh svo blue pearl paint job.

However, the worn old Strange struts were shot. Felt every little bump on the road. The IRS springs were way too soft and caused the car to bottom out in the rear...and the tire brands didn't match front to rear.

One hot summer day I rollz up to O'Reilly's and bought jack stands, struts, shocks, and spring spacers. The guy came out of the store and saw me on the side with my car on the 4 jack stands wonderin' what the hell I was doin'. We talked a bit and I told him I'd only be about an hour. He told me if I was done in an hour he'd let me get a refund on the jack stands....

Needless to say, I got it done with a few minutes to spare. He refunded the money for the stands. I drove over to a tire shop and bought 4 tires and got an alignment.

I remember telling the guys not to use my ebrake...but they did anyways. Man was that tech scared when the back wheels were locked up. Lol. I didn't have return springs on the rear calipers. To release them you had to stick a screw driver back there and pry the e brake cam. Almost scared them into giving me the alignment for free...but they were all way too cool for that.

This UPR bump steer kit came from the first trip to MW Myrtle Beach....
where I met Mike with his red throwback mustang coupe. Me and Carmicheal Angelo talked for at least an hour or so that day. ( he don't remember none of it...that old coot. Lol )
These struts carried me through a lot of pot holes....blizzards....trips to the track....even took a ride over a curb with Dusty. I'll miss these old cheap struts. It was great but sometimes ya jus' have to move on.

20190303_145241.jpg


If you notice the new bump steer ends are on the old bump steer kit. That's because the UPR kit end is way longer allowing for more adjustment. The threads on the outer heims joint are also reverse thread which simplified adjustment. With the new kit I have to turn the inner tie rod to adjust. With the old UPR all you had to do was loosen the nuts and turn the blue aluminum body. Not a big deal.

20190303_123033.jpg


Car is back down on the ground and everything is installed.

20190303_143430.jpg


I installed the OEspectrum Monro struts. I want to do coil overs and adjustable struts but the budget wouldn't allow it yet. Kinda caught me off guard when I went to tuck the passenger side. No way I could leave it the way it was.

There's no more play in the struts or bump steer kit....I'm happy.

I found these and will be installing to keep dirt out of the heims joints. Should help them live a little longer.

Screenshot_20190226-215350_Chrome.jpg
Oh My God!
You've went all these years, and just now are mentioning that we spoke?..I must've talked to 93 bagillion people over those two days in 2012...Im sorry if I forgot, I barely remember anything from that trip other than it started with me driving through a torrential rain storm, and ended with me in a white knuckle panic driving back smelling antifreeze and not knowing if the engine was gonna boil over any second for 300 miles.
I found the thread...did you come on and remind me that we spoke at that time?
https://www.stangnet.com/mustang-fo...s-im-the-owner-and-a-can-of-bars-leak.859524/
 

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Oh My God!
You've went all these years, and just now are mentioning that we spoke?..I must've talked to 93 bagillion people over those two days in 2012...Im sorry if I forgot, I barely remember anything from that trip other than it started with me driving through a torrential rain storm, and ended with me in a white knuckle panic driving back smelling antifreeze and not knowing if the engine was gonna boil over any second for 300 miles.
I found the thread...did you come on and remind me that we spoke at that time?
https://www.stangnet.com/mustang-fo...s-im-the-owner-and-a-can-of-bars-leak.859524/
I wasn't a member back then...didn't know anything about stangnet 'til ya told me. I got caught in the same rain storm on the overpass on 17. No where to pull over so we got soaked.

20190304_095133.jpg


20190304_095114.jpg
 
  • Surprised
Reactions: General karthief

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
Had a few minutes to spare this evening. Decided to tackle the ash tray door and the e brake recall fix.

This is what happened to my center console...

20190308_195658.jpg


I was on the phone with the wife ( while she complained about everything under the sun ) and heard a crack. The seal for the e brake just cracked clean off. Then I re- noticed this...

20190308_195641.jpg


The arm that holds the spring is completely gone. I knew this when I put everything back in the car....but I forgot. The repair kit won't work. I can make something to fix it but I won't. Looks like I have another thing to order.
 
  • Like
Reactions: RaggedGT

90sickfox

I didn't really have an issue with the stink...
SN Certified Technician
Mar 2, 2015
5,377
4,405
203
42
The e brake repair went flawless. Heres a before shot...

20190308_194511.jpg


Here's the recall part...

20190308_194502.jpg


Here's where it goes. What it does is locks the ratchet pawl in position. When the handle is down the pawl is released. When you pull it up it grabs one of the teeth and sets the brake. That mechanism could fail causing the e brake to not grap. Easy install...

20190308_195606.jpg


20190308_195533.jpg


I use an e brake out of a 98 mustang. Its different than the 79- 93 mustangs. Made the change because of the IRS and the sn95 style cables.

Works like a charm.
 

CarMichael Angelo

clearly, I’ve got something going on in that hole
SN Certified Technician
Nov 29, 1999
12,934
14,191
234
62
Birmingham, al
m.imdb.com
The e brake repair went flawless. Heres a before shot...
20190308_194511.jpg


Here's the recall part...

20190308_194502.jpg


Here's where it goes. What it does is locks the ratchet pawl in position. When the handle is down the pawl is released. When you pull it up it grabs one of the teeth and sets the brake. That mechanism could fail causing the e brake to not grap. Easy install...

20190308_195606.jpg


20190308_195533.jpg


I use an e brake out of a 98 mustang. Its different than the 79- 93 mustangs. Made the change because of the IRS and the sn95 style cables.

Works like a charm.
I can see the problem before you even point it out...the things all covered in blur.
 
Thread starter Similar threads Forum Replies Date
90sickfox DUSTY'S New Start After Intake Replacement Digital Self-tuning Forum 3
T Dusty engine bay 2005 - 2014 S-197 Mustang -General/Talk- 13
7 Trying to figure which headers I need for my project 1965 - 1973 Classic Mustangs -General/Talk- 2
K Trying to figure out how the "valley heater hose" connects to the back of the water pump 1996 - 2004 SN95 Mustang -General/Talk- 3
YadiStang Low voltage at coil - after trying to start the motor? 1965 - 1973 Classic Mustangs -General/Talk- 1
L High Idle and Hanging RPM. Tried everything, still no fix. SN95 4.6L Mustang Tech 0
J Progress Thread Try this again. 1996 - 2004 SN95 Mustang -General/Talk- 0
8 Electrical Trying to find wiring diagram Fox 5.0 Mustang Tech 9
zack2001 Grille fasteners/clips won't move (Trying to replace the horn) 2005 - 2009 Specific Tech 0
Alldegree Progress Thread Let's try this again... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 318
S Setting Up a Paint Booth in Your Garage - Anyone Tried These The Welcome Wagon 0
R Is the dealer trying to make an extra Buck or a thousand Bucks! 1996 - 2004 SN95 Mustang -General/Talk- 3
Sycostang67 Trying to get back in an SN95 The Welcome Wagon 2
L Lets try this again. Have a 72 Mach 1, need to replace the passenger side power motor. Motor engages but the window only moves slightly Classic Mustang Specific Tech 2
LarsD Fox Trying to sell my fox 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
C New to Mustangs and trying to decide what to order 2015+ (S550) Mustang -General/Talk 5
W FUEL PUMP PROBLEM NEW HERE AND TRYING TO LEARN 1996 - 2004 SN95 Mustang -General/Talk- 22
R Trying to determine original aint color on my 65 1965 - 1973 Classic Mustangs -General/Talk- 0
A I'm trying to bend the rules of CARB laws. Please help me with your knowledge and wisdom 2005 - 2014 S-197 Mustang -General/Talk- 3
S Having issues with my 97 cobra mustang. Tried to put a tune on it with a diablo sport in-tuner. 1996 - 2004 SN95 Mustang -General/Talk- 0
I I'm trying to replace my rear shocks and the hardware is totally rusted! Fox 5.0 Mustang Tech 0
GT1966 5.0 engine with Tri-Y headers 1965 - 1973 Classic Mustangs -General/Talk- 4
K Electrical Can't find issue with starter. Tried everything I can think of. SN95 4.6L Mustang Tech 2
S197GT Trying to fix the infamous water leak 2005 - 2009 Specific Tech 1
S Anyone try these OEM 2017 Mustang wheels on their 5-lug Fox? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
gnadts7 Trying to identify Rear end 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 18
N My 1987 fox body 5.0 motor wont goes pass idle when trying to rev it Fox 5.0 Mustang Tech 36
R First day on this forum - already have a mod trying to flex his authority The Welcome Wagon 9
Ian Ranchero Will these headers fit Gt40p heads 1965 - 1973 Classic Mustangs -General/Talk- 9
M 2003 gt misfire tried almost everything SN95 4.6L Mustang Tech 19
Mustang936590 Trying to figure out my injector/MAF situation... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 7
geoklass Exhaust What ever happend to Tri-Y-Headers? Fox 5.0 Mustang Tech 0
D I'm trying to post my mustang for sale on this site having no luck The Welcome Wagon 2
M trying to fix a horn probem in a 67 1965 - 1973 Classic Mustangs -General/Talk- 1
A Need help trying to fix my lock 2015+ (S550) Mustang -General/Talk 0
1995COBRA 95 Cobra starts right up and idles fine at first, but then after about 2 minutes, I try and restart and it does not hold an idle. 1994 - 1995 Specific Tech 12
9 Steepest gear ratio ever ran? (i run 4.56) Anyone try 4.88? 5.71? 1996 - 2004 SN95 Mustang -General/Talk- 3
M 1994 Mustang gt. cranks and tries to start 1994 - 1995 Specific Tech 2
O Having problem 5.0 89 instaled weiland intake and tried to install msd 8598 dis won't go all the way in hits the manifold lacking 1/4" from going in Fox 5.0 Mustang Tech 4
J 2010 GT Need advice re: PCM i.e. buy new car or try to repair 2010 - 2014 Specific Tech 1
Creomod Engine 89 fox tried to install rockers but getting different amount of turns heads milled to much or vavles not same height Fox 5.0 Mustang Tech 18
9 Anyone try Motor Medic - Motor Flush ? I think it works GREAT! [proof] Other Auto Tech 1
Tim Watts Expired Wanted - 1994 Tri-Bar Alloy Wheels in UK Wheels Tires Brakes 2
6 Trying to find a set of period correct wheels 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
T 408w swap: Trying to ID these headers 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
CobraJet69 Trying to figure out how to change my profile picture? The Welcome Wagon 4
J Fuel 01 V6 - 90 psi Fuel Pressure when Hot!! / P0193 Tried everything SN95 V6 Mustang Tech 10
S HELP! Tried Everything. Mustang Cobra 1994 Cranks but won't start... Fox 5.0 Mustang Tech 12
gonzo.ayres 1977 cobra ii trying to see if numbers match? 1974 - 1978 Mustang II Talk & Tech 8
L Engine 1987 GT surging and dies when trying to start Fox 5.0 Mustang Tech 3
Similar threads