Finnaly
Anyway my new tire showed up today and man for $97 it was a deal and a half. Cant have more than a couple thousand miles on it My Cobra badge also showed up So I figured I would finish the brackets for the lower spoiler and attatch them. In the process I see the two lower plastic screws are gone so that ment Autozone Since I had to remove the bumper to get the bracket in place I figured it was a good time to tiny my fog lights again since the first one was flaking off. It will prolly flake off again so when I can afford them I will buy smoked fogs I also tried to fix the intercooler as well as I could but the center fins got ripped a little Not from me but from the grill impacting it when pops hit the curb
I figure I will prolly end up painting the supports Sonic Blu and then I will re paint the intercooler support but I want to pressure wash the under side first. If I can help it this thing will never see rain again
Anyway, here are the pics. I forgot to change the cameras settings beforehand so they are not that hot
The supports are hot glued in place with high temp stuff. I can still remove them if need be.
Smoked the fogs
The VHT would work great if I did it from behind But then I woulda had to break the seal and then they would always fog up. Cant have the fogs foged
After trying to fix it:
Also cut out the openings. And yes I will get a new one, they are $105 I would ditch it but the paint is worn in a couple spots behind it.
My newish $97 tire
And you will notice that thre is no locking one on this wheel as pops lost the key somewhere and I had to grind flat spots on it to use a wrench. They were special order for thes wheels Took two weeks and $70.
The finished product!:
Anyway my new tire showed up today and man for $97 it was a deal and a half. Cant have more than a couple thousand miles on it My Cobra badge also showed up So I figured I would finish the brackets for the lower spoiler and attatch them. In the process I see the two lower plastic screws are gone so that ment Autozone Since I had to remove the bumper to get the bracket in place I figured it was a good time to tiny my fog lights again since the first one was flaking off. It will prolly flake off again so when I can afford them I will buy smoked fogs I also tried to fix the intercooler as well as I could but the center fins got ripped a little Not from me but from the grill impacting it when pops hit the curb
I figure I will prolly end up painting the supports Sonic Blu and then I will re paint the intercooler support but I want to pressure wash the under side first. If I can help it this thing will never see rain again
Anyway, here are the pics. I forgot to change the cameras settings beforehand so they are not that hot
The supports are hot glued in place with high temp stuff. I can still remove them if need be.
Smoked the fogs
The VHT would work great if I did it from behind But then I woulda had to break the seal and then they would always fog up. Cant have the fogs foged
After trying to fix it:
Also cut out the openings. And yes I will get a new one, they are $105 I would ditch it but the paint is worn in a couple spots behind it.
My newish $97 tire
And you will notice that thre is no locking one on this wheel as pops lost the key somewhere and I had to grind flat spots on it to use a wrench. They were special order for thes wheels Took two weeks and $70.
The finished product!: