Here is a deal , finally i decide to do 347 stroker (i was tired playin with 302 )
I will be using my stock block which have 115K miles (which is still in good condition , its never overheated ,compression is good and cilynder walls are good too , no cracks or anything)
I gonna use my TFS TW heads which have TFS Track Head upgrade kit and AFM B-31 cam (whch is blower cam 8-15psi)
I have APR bolts that i installed 2 years ago when i did H/C swap so i gonna use them too
Headers are gonna be same for now MAC 1 5/8 LTs
Intake will be same to TFS Track Heat and BBK 75mm TB
I wanna see around 500 HP/TQ max on this motor with power adder (blower or turbo)
So what parts i gonna need to get this 347 build done
Car will be driven like now around 5k miles a year ,so i don't wanna build something that will overheat in traffic
Then again i don't wanna spend a lot $$$ on stroker kit because i gonna use stock block (everyone knows stock block are good to 500-550HP with good tune)
Here i a list of mods i have right now and i will be using those parts on this 347
MODIFICATION:
Trick Flow Twisted Wedge heads
B-31 AFM custom cam
1.6 RR SVO
TFS Track Heat polished/ported
TwEECer RT
PLX-M300 Wideband
Mac 1 5/8 Long Tube Headers
Mac O/R H-Pipe
Flowmaster American Thunder Exhaust System
Tremec TKO500 tranny
PRO-5.0 w/ Bullitt knob
Pro Motion "kustom" clutch kit
FRP Driveshaft
FRP 3.73s gears
MSD 6A Ignition
MSD Blaster TFI Coil
BBK U/D Pulleys
Fluidyne 2 row radiator
160* Thermostat
So what parts and what brand i need (like whatoil pump ,should i go with electric waterpump or replace with stock replacement .........)
Thank you
I will be using my stock block which have 115K miles (which is still in good condition , its never overheated ,compression is good and cilynder walls are good too , no cracks or anything)
I gonna use my TFS TW heads which have TFS Track Head upgrade kit and AFM B-31 cam (whch is blower cam 8-15psi)
I have APR bolts that i installed 2 years ago when i did H/C swap so i gonna use them too
Headers are gonna be same for now MAC 1 5/8 LTs
Intake will be same to TFS Track Heat and BBK 75mm TB
I wanna see around 500 HP/TQ max on this motor with power adder (blower or turbo)
So what parts i gonna need to get this 347 build done
Car will be driven like now around 5k miles a year ,so i don't wanna build something that will overheat in traffic
Then again i don't wanna spend a lot $$$ on stroker kit because i gonna use stock block (everyone knows stock block are good to 500-550HP with good tune)
Here i a list of mods i have right now and i will be using those parts on this 347
MODIFICATION:
Trick Flow Twisted Wedge heads
B-31 AFM custom cam
1.6 RR SVO
TFS Track Heat polished/ported
TwEECer RT
PLX-M300 Wideband
Mac 1 5/8 Long Tube Headers
Mac O/R H-Pipe
Flowmaster American Thunder Exhaust System
Tremec TKO500 tranny
PRO-5.0 w/ Bullitt knob
Pro Motion "kustom" clutch kit
FRP Driveshaft
FRP 3.73s gears
MSD 6A Ignition
MSD Blaster TFI Coil
BBK U/D Pulleys
Fluidyne 2 row radiator
160* Thermostat
So what parts and what brand i need (like whatoil pump ,should i go with electric waterpump or replace with stock replacement .........)
Thank you