Is this all I need for clutch swap?

[vikingpower]

So I got a King Cobra clutch kit, FRPP roller pilot bearing and a steel bearing retainer, hopefully this is all I need? Also will I be able to do the whole job in my driveway with hand tools, torque wrench and floor jack? Any helpful tips are appreciated, thanks

 

[HISSIN50]

A RMS might be wise if yours leaks.

You can do it in the driveway. I'd search - Jrichker and 5spd GT both have long clutch R/R write ups.

Good luck.

 

[vikingpower]

Ah, very good idea, when I did my cam swap the front seal was trashed so the rear is probly on the way out too

 

[HISSIN50]

Good call on the RMS.

I should have also mentioned little ancillary items like possibly replacing the fork and pivot stud.


Good luck.

 

[foxbody88stang]

You should probably use JACK STANDS not just a floor jack

 

[donsbad68]

Get to it, you have what you need. Well that and time.