- Oct 18, 2005
- 145
- 0
- 0
:Word: I am currently deployed, and looking to do some changes when I get home. I have about $1500 to spend. My sig states most of my mods. Just before I left I blew a head gasket, and repaired it. Below is a complete breakdown of my car. Where should the money go first?
Ported stock heads, new springs, valve job
Stock upper/lower
A/C installed
Electric Fan w/alum rad
3.55 gears
Weld draglites 15x7F/15x8R
MT ET Street Radials 235-60-15.......thinking of going bigger
(I originally had them on 10 holes, until I got the Welds)
Front sway bar removed
Battery in Trunk
FMS progressive rate lowering springs 1in (F) 3/4 (R)
Stock upper and lower control arms w/polyurethane bushings
I know a set of aluminum heads would do wonders for my car, but I am considering bigger drag radials, and BBK lower control arms first, and maybe new upper/lower intake, cam, or roller rockers.
I run 12.5 pretty consistent with 1.7-1.8 60ft times.
Thanks for the help.
Ported stock heads, new springs, valve job
Stock upper/lower
A/C installed
Electric Fan w/alum rad
3.55 gears
Weld draglites 15x7F/15x8R
MT ET Street Radials 235-60-15.......thinking of going bigger
(I originally had them on 10 holes, until I got the Welds)
Front sway bar removed
Battery in Trunk
FMS progressive rate lowering springs 1in (F) 3/4 (R)
Stock upper and lower control arms w/polyurethane bushings
I know a set of aluminum heads would do wonders for my car, but I am considering bigger drag radials, and BBK lower control arms first, and maybe new upper/lower intake, cam, or roller rockers.
I run 12.5 pretty consistent with 1.7-1.8 60ft times.
Thanks for the help.