Search results

  1. fastangboi

    Cluster comes on delayed after testing Trac Ctrl

    I was testing voltage going to and from my traction control switch and it popped the interior lights fuse. Then when I got a new fuse in my instrument cluster comes on delayed. I replaced the GEM next to the fuse board on the drivers side kick panel. That wasn't it. My only "guess" at this...
  2. fastangboi

    front suspension problem

    Another Mustang owner told me she was having the same problem i was with my 2000 Mustang. While backing up and cutting the wheel in either direction the front suspention gives a feeling that its running over small bumps. if that makes any sense. Now i thought it was because i was lowered but...
  3. fastangboi

    Mach 460 cd player

    I have a 2000 gt and my M460 unit has the seperate reciever and cd player. i upgraded the head unit and am not sure what to do with the stock single cd player. i cant find any cubby compartments or block off plates. if they do exist can someone direct me. Thanks
  4. fastangboi

    tried and true rear suspention

    alright before i dedicate any money into the rear suspention, what is the ideal drag set up for the rear on an 89? not that 1989 matters just letting you know what its on. ive heard 50/50 shocks and 4 banger springs. i should mention that i already have BBK Gripp upper and lowers, and i...
  5. fastangboi

    Highest flowing 5.0/5.8 head?

    just so i can set a roof of expected n/a performance. Who makes the baddest high flow heads for the 302. A buddy of mine has some Trick Flow twisted wedge and those look insanely mean.
  6. fastangboi

    EFI to Carb trade off

    alright ive got a buddy that has agreed to switch me his complete carb set up for my EFI. he has Edelbrock 600 carb Edelbrock RPM performer intake, 2"x14" K&N MSD 6 BTM w/ retard switch MSD distributor tank, pump, fuel lines for my 80mm cia under hood 76mm C&L maf 70mm t/b light...
  7. fastangboi

    pin on hatch

    Alright ive got a 89gt and a pin on style hatch with a Lexan window. Does anybody know how to set this up? like are there any write-ups hidden in any forum, im having a hard time running this info down. thanks guys:D
  8. fastangboi

    351 swap ??

    ok there have been thousands of guys that have done this swap, but my question is... Were there any unexpected snags in the project that you didnt anticipate? I mean anything. Its my first time going form a 302 to a 351 and i want to be prepared and do it right. i anso dont know if my 302...
  9. fastangboi

    From EFI to carb'd on an 89

    what is the shopping list of parts to do the swap? Already i figured a 650 Carburator, inline fuel pump, GMS in tank pick-up, manifold, filter. What else? any vacuum conversion or ignition concerns?
  10. fastangboi

    Ideal Turbo Cam

    not enough modular guys are running single turbo to give consistant results. Was wondering what would be a good costom grind for a single turbo set-up. Im running p/p heads, 17cc dish pistons. was thinking on getting bigger exahst valves too.
  11. fastangboi

    4.6 SOHC SVO head ?s

    Sean Hyland recomends these heads, but it is a straight bolt on for 96-98 but requires modifications for fitment on a 99-04. Its hard to run down these heads and they cost $899 each. Intake flow is [email protected] vs PI [email protected] (cfm) Exhaust flow is [email protected] vs PI [email protected] (cfm) Chamber volume...
  12. fastangboi

    is bigger better?

    I installed my trans cooler not too long ago and instead of going with the B&M one that is recomended which is 6inch by 11inch i went with one thats 10inch by 12inch. That wont hurt anything will it?
  13. fastangboi

    Whats the "j-mod" for 4r70w?

    ive read about it and heard of a few guys that regret it. but some say they wish they did it instead of getting a shift kit. does any one know where a write up is? has anyone had any personal experience with it?
  14. fastangboi

    Plenum spacers?

    Any body running these? are they just a gimic or are they worth a few more horses?:shrug: :shrug:
  15. fastangboi

    SRT-4 vs. 2000 GT

    Was wondering if a 2000 auto GT could beat an SRT-4? there is a kid in my neighborhood that sees my mustang in the driveway and does a blow off right in front of my house. i was wanting to shut him up but i dont know how they perform.:shrug:
  16. fastangboi

    Sticky icky

    Could someone sticky a write up on the oil seperator and the functional inside tail light mod. These two are a $20 must for every mustang.
  17. fastangboi

    Modular Cam gurus

    My friend bought me a Sean Hyland "How to build max-performance 4.6-Liter Ford Engines. Its copyright 2003 so some of the stuff is out dated but i read that the Windsor PIs have a press on camshaft gear and the Romeo PIs have a bolt on. This concerns me just because i want to make sure i have...
  18. fastangboi

    Comp Cam

    Im seriosly considering the CC XE270ah cam. The stats are 234/238 lift @ 050, 550/550, 113 separation, 270/274 lift. i would be purchasing 550 springs as well. Does anyone know clearances, like if the valve will hit the piston? And ive read that Comp Cams are "noisy".
  19. fastangboi

    this might not belong here

    i say that because its a video, but im tring to figure out what kind of wheels this guy has. so it follows suit with the guys that post a pic and say "what is this?" sweet vid too, though. Click here to see Video Fourth gear baby, GIT IT!!
  20. fastangboi

    Anybody know what kind of wheels this guy has

    Click here to see Video
Top Bottom
Back
Forums
Menu