Search results

  1. notchnut

    After along time away, It's time 4 another Fox!

    Havent been in the Fox scene for about 7 years so I'ts time to make a comeback. I dabbled with a Terminator, had a 99 Blown GT but my heart is with the Fox so after diligently taking care of family responsibilities over the past couple years its time daddy gets another toy. I probably wont...
  2. notchnut

    Vortech Oil return line leaking, any idea's?

    I just noticed that the bung is leaking where it goes into the oil pan. It looks as someone already put some mighty putty on it! haha. I am having my new exhause tips welded on next week should I ask the mechanic if he can do something with it or does it need to be brazed because of the brass...
  3. notchnut

    SCT X3 software, seriously?

    :mad:I have never been so pissed off at something so stupid. I have an X3 that I got with my car and have not used it yet. I am trying to load an email tune I got from VMP tuning to get my car running but my X3 will not communicate with my laptop. I am running Vista so I dont know if thats an...
  4. notchnut

    how screwed am I?

    I was just re-clocking my V2 for my fmic install and the little rubber gasket between the compressor and cover broke! what can i do?
  5. notchnut

    quick brake kit question

    If I buy the Cobra caliper kit from Buyfordracing, can I buy any other Cobra 13" rotor like cross drilled pieces? The cross drilled is mainly for looks for summer car shows. thanks.
  6. notchnut

    chassis clunk, help diagnose?

    I will do my best to describe this: I just installed MM LCA's and while I was in there I ensured that the uppers were torqued correctly. Everything seems legit under there. My car only has 21k on it so the undercarriage is pretty clean and strait. when i turn (notice it more on left turns...
  7. notchnut

    idle goes up with defrost?

    just noticed it today, car idles perfectly at about 700, when i urn on the defrost or mix (defrost/floor) the idle goes up to 950 or so. Any ideas?
  8. notchnut

    Mafia extender + SCT X3?

    My current setup in sig, when i'm done with the FMIC install it will be a draw through, I'm using a Vortech Mini Race if it matters. I was wondering if I should spend the $100.00 on a Mafia extender before I get tuned or will my SCTX3 do the job just as well?
  9. notchnut

    Baer Claw brake system

    I found a great deal on a Baer Claw brake system fo rmy 99, it comes with 1 piece zink washed 13" cross drilled rotors, the duel piston front aluminum calipers, ss brake lines etc, Do I need anything else to install this kit? I plan on just getting matched rotors fo rthe rear and retaining...
  10. notchnut

    **safety tip**

    Some of you may be aware of this however I feel it's neccesary to post. Today I took the stang out of hibernation for a nice 1 hour cruise. As I was getting on the highway I shifted to 3rd and floored it (to check my boost level, and for fun) The problem showed itself when I let off the pedal...
  11. notchnut

    Vortech V2 - V1 Interchangeable?

    I was going to trade my V2 SQ trim to someone for his V1 S trim, If we just exchange head units should they bolt up to our brackets respectively? I'm not going to do the trade if it's a PITA. Also is there any good questions to ask outside the normal ones to ensure the head unit is good?
  12. notchnut

    Noob to AN fittings, help

    OK who has the trick to get the end fittings on AN braided line? I have Earls hardware and hose for my remote fuel pressure guage sending unit and I cannot for the life of me get the end's on the hose. I only have basic hand tools. Whats the trick to getting this stuff together?
  13. notchnut

    wiper delete?

    Seeing that my car doesn't see rain I decided to remove the wiper arms for a smooth look but I need to find some rubber or silicone covers for the wiper arm gear to complete the look. Anyone have any idea's where I can find these? I searched but came up with squat. thanks.
  14. notchnut

    where to get MAF snsor calibrated

    Is their a company out there that you can send your MAF to and have them calibrate it and then send it back?
  15. notchnut

    Which Bypass for my Vortech?

    I'm currently running a 3.12" pulley on my V2 and seeing a consistant 10lbs non intercooled. I'm installing a FMIC this winter and was wondering if I should just stick with the standard Bosch bypass valve (Vortech rates it at 6-12 LBS) or upgrade to a Vortech Maxflow or Mondo? Obviously they are...
  16. notchnut

    question about fuel pressure guage install

    I scored a used Auotmeter Ultralite 2 1/16 electric fuel pressure guage on EBAY for 80 bucks, its like new and came with the sending unit but I'm a noob with this guage and was wondering where I plumb in the sending unit o the fuel system, I'm assuming the fuel rail but I dont know where, anyone...
  17. notchnut

    cutting springs?

    I have Steeda springs on the Stang and I want to even out the rake just a hair. I honestly only want to drop the rear about 1/2" to get the stance I want. What is the best way to cut springs? Never having done it before I'm a bit nervous but the alternative is buying a whole new set of springs...
  18. notchnut

    check it out, post up if your in

    http://forums.stangnet.com/769407-stangnet-stimulous-package.html
  19. notchnut

    checkit out, post up if your in

    http://forums.stangnet.com/769407-stangnet-stimulous-package.html
  20. notchnut

    check it out, post up if your in

    http://forums.stangnet.com/769407-stangnet-stimulous-package.html
Top Bottom
Back
Forums
Menu