Search results

  1. UTGAMER

    SN95 Body parts

    Anyone know of a place I could get a passenger door and quarter panel if junk yards don't have? I wrecked over the weekend. Sucks so bad . And how hard to replace
  2. UTGAMER

    Bad brakes symptoms but not brakes

    Took my car into shop before rebuild and got my brakes checked bc when I brake it feels like im in the rotors but he said its not my brakes it was something else. I cant remember and was hoping yall might know what it is. It was something behind rear rotors said would also need to replace...
  3. UTGAMER

    A/C recharge

    Me and my buddy tried to recharge my ac today and it would not work. There is 2 valves one called upper and the other lower. I guess the lower would have been the one closest to the fan on passenger side and upper on driver side closest to firewall? Anyway the lower one was too big for the...
  4. UTGAMER

    How important

    How important is it for the ground wire that runs from chassis to engine to be on the engine>? Mine ran from the chassis to the engine mounts, but broke when we were takin mounts off. Now it wont reach to bolt it on any engine parts except a screw on bottom of power steering pump which I dont...
  5. UTGAMER

    What are these?

    There is 2 of these. They run from drivers side firewall. the other end of the box looks like a wire was running out of it and cut off. And inside the box mayve a fuse or something goes in it? And then these 2 wires I dunno. one is red the other is purple and white. The red has never...
  6. UTGAMER

    POWER STEERING

    Well yall finally get everything back in and running right except now my damn steering feels like .......Well kinda like a go -kart. My Power Steering Pressure Hose is leaking fluid pretty rapidly . It will empty over night I was wondering if this is what may be the cause?? it seems like WHILE...
  7. UTGAMER

    Timing help

    Got my engine back in today but I think the timing is off. It wont start. We tried putting straw in #1 and paper trying to find TDC . You cant see any mark on wheel to match up, but there is a really big gash/ cut mark there is this a timing mark? Its pretty big and deep. Yall know any ways to...
  8. UTGAMER

    DEXMERC trans fluid

    will this be ok to put in my transmission ? I think it calls for Mercdon ATF or something but I already got this. And can someone explain why a 5 speed would use automatic fluids?
  9. UTGAMER

    SeaFoam

    Got engine back together, but not back in. When I do drop it I was gonna put seafoam n..Any ever use this? I got some today and was wondering if its as good as it suppose to be? And it says to "pour it in crankcase(OIL)"? Would this be where pcv screen an gromet is? Or in actual oil fill neck...
  10. UTGAMER

    let's talk stroker

    I know what yall are thankin, this guy needs to make up his MF'n mind!!! Most of you talked me out of the 351w and got me thankin a stroker may be best way to go. SOOOOOO Whats some good kits? (REMEMBER MY 35-4K$ BUDGET) How much HP gain will I be lookin at? Im stock except MSD...
  11. UTGAMER

    Good combo?

    I was advised to do this for a 351w buid Buy a 351w EFI manifold. If you want a good running, solid performer. Buy the lightning GT-40 lower, and a Cobra upper. Grab a set of GT-40 heads. They can be had for $300. Grab a set of 24# injectors buy a 70mm TB off summit new, or buy one used...
  12. UTGAMER

    Will this mount fit my T5

    Broke some bolts in my mount and needing to replace it will this fit a T5 Mount Engine-Transmission by Anchor - Part 2784 - Advance Auto Parts
  13. UTGAMER

    Cleaning engine

    I was wondering about cleaning my engine block while its out. Ive got the pistons out is it ok if water and degreeser got in it? Or is this something I need to prevent? Any advice on all parts would be appreciated
  14. UTGAMER

    Tearing her down

    Well me and a friend started taking my engine apart and I was thinking what I should do while Im at?? Nothing expensive, but maybe bore and new pistons? If so what sizes?
  15. UTGAMER

    UPDATED: Compression test

    I dont know if I was supposed to do it in a certain order, or not? And Im not sure if this is the right way the cylinders go for you to understand which is which cylinder, but Ill try. If Im reading it right according to Haynes Cylinder#1 is passenger side farthest away from firewall then 2...
  16. UTGAMER

    How about this for a new engine

    What do yall think about this http://cgi.ebay.com/ebaymotors/FORD-302-331-HP-TURN-KEY-CRATE-ENGINE-BEST-STREET-3an-/200500564561?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item2eaec3d251 it would be ready to just drop in, right? And good price seen another with 300HP for $7000
  17. UTGAMER

    Compression Test

    So I finally get around to doing the test and it starts raining. I was needing to ask yall what should the psi gauge read? I only got to check 1 cylinder and its was maybe 65, but the ignition coil was still hooked up and engine was cold. I cant get car to run to warm it up
  18. UTGAMER

    Seriously need help and advise

    As yall know Ive been having some problems with car not idling and smoke, pcv oil coming out intake manifold vacuum fitting. bare with me I have replaced PCV valve, made a new fitting, and today replaced IAC valve. Still wont idle without giving it gas. SHOULD I TRY EGR? I know my...
  19. UTGAMER

    Which is EGR, or is this

    This is under throttle cable is this the EGR valve? Or solenoid I read that EGR will have a P stamped on it none of these do as far as I can see Or this is under MAF/CAI housing wanting to replace EGR valve hoping its my engine not idling prob
  20. UTGAMER

    Bad ECT

    Could a bad ECT cause car not to be able to idle? I was reading about them, but not sure if it would be to the extent I am having. I got a code 116 which is an ECT. Also my engine always seems hot, but not showing on gauge. Outside fender walls so hot you cant touch and it gets hot fast. I have...
Top Bottom
Back
Forums
Menu