Search results

  1. B

    Stall Convertor

    I have a Precision Industries Stallion 3000rpm converter. 3,000rpm is the minimum I'd suggest for most cars. I wish mine was more like 3,400.
  2. B

    Whats the size and thread pitch for O2 and IAT sensor?

    I've read that the O2 sensor = M18x1.5 and the IAT = 3/8 npt If some one knows different, let me know. Josh
  3. B

    Whats the size and thread pitch for O2 and IAT sensor?

    What is the size and thread pitch for the standad O2 sensor and what is the size and thread pitch for the Intake Air temp sensor? Thanks, Josh
  4. B

    need help!!!! broken lower intake bolt

    I just got a broken bolt out of a block for a guy that broke a water pump / timing cover bolt almost flush with the block. What I do is place a steel nut that is ever so slightly larger on the inside than the broken bolt over the broken bolt. Then I fire up the mig welder and weld the exposed...
  5. B

    WTF Son! AC compressor- how to move it?

    Ford WSM: Removal 1)Remove the drive belt. . 2)On the 5.0L engine, remove the battery and the battery tray. 3)Remove the A/C manifold and tube retaining bolt and remove the A/C manifold and tube (19D734) . Cap the refrigerant lines and compressor manifolds to prevent the entrance of dirt...
  6. B

    A/F Ratio Monitoring, How To Do So

    This kit will let you read both banks at the same time: http://www.fuelairspark.com/Products/Information/AirFuelMeter.asp Good luck
  7. B

    WTF is this ?

    That looks like the circuit breaker that was installed for the cooling fan recall that Ford had.
  8. B

    Looking for help to get my car running right in Michigan

    Just bringing this back up. I started checking out the car. It seems that it only stalls / flashes up to about 2000rpm. It looks like that is the problem. I wish I had the money for a 9.5" converter.
  9. B

    A/C not working

    Not always the case. That is the low pressure switch. If your system is just low enough on r134, the low pressure switch won't let the compressor kick on. If you "jump" the switch, it will force the compressor to come on (That is if the problem was just a low amount of r134 or a bad switch) and...
  10. B

    PRICE MY CAR PLEASE!!!!

    I paid $4000 for mine (See description in sig.) with every thing already done. It had less miles than yours and the body is perfect. I didn't have to "search" for it either. I came accross some money , looked on a couple of sites and bought it with in 72hrs of looking. Oh, I did have to replace...
  11. B

    Torque converter questions

    No, not big power. Just little funds. A good LU style conver will run $500 - $800. I've heard a good Non-LU style can be had for $300-$500. The difference may be weather or not I get to enjoy my car this year. I may be able to scrounge up to $450 but after that I'm done.
  12. B

    Torque converter questions

    Does anyone know if the TC's are physically interchangeable between the '95 302-AODE and '99 3.8L 4R70W? Can a no-lockup converter be used with out the '95 EEC causing problems? Thanks, Josh
  13. B

    Thinking about selling the car! LONG!

    I'd bet in the Detroit, Michigan area you'd ask about 8-9k and you get 6k maybe if you found the right buyer and at the right time. It's worth way more but they almost never sell for close to what you've got into them. I had a beautiful 1979 Buick Regal, perfect body, custom paint, fresh 430 big...
  14. B

    worth upgrading a base Tweecer to R/T????

    www.tweecer.com Upgrade from the base unit is $205. More expensive in the long run to buy Base model and then upgrade.
  15. B

    Testing CCRM

    Here is a schematic:
  16. B

    Testing CCRM

    Mustang Pin Circuit Wire Color Application Abbreviation 1 260 R/O Power to Cooling Fan (Low Speed) PTF 2 260 R/O Power to Cooling Fan (Low Speed) PTF 3 38 BK/O B (+) to Fan Relay B (+) 4 38 BK/O B (+) to Fan Relay B (+) 5 238 DG/Y Power to Fuel Pump PTP 6 261 O/BK Power...
  17. B

    why cant i read my codes?

    Did you have it plugged in to the connector behind the PASSENGER side strut tower? I know I had a heck of a time trying to get engine codes from the ABS connector by the battery:rolleyes: Josh
  18. B

    Detroit Area Mustang guys

    Good luck, I've been at the same company for almost 7 years. We are a very secure company BUT we have had people leave to go to Atlanta and North Carolina to start fresh. Seems like those areas are growing. Josh
  19. B

    Looking for help to get my car running right in Michigan

    I'll have to check and see what it flashes up to BUT it is a new trans and I replaced the converter with a new one that I was told had a 500rpm higher stall than stock. I bought the car with a rosted trans so I don't know what the original one stalled at. I think this one stalls to about...
  20. B

    Detroit Area Mustang guys

    Looking for help to get my car running right. Is there anyone out there in the Metro Detroit Michigan area that is willing to help me out? I have racked my brain with trying to get this car to idle. I've tried every way to adjust my idle that I've read on the internet. It will be perfect for a...