coil= no power

[sidewayzisbest]

Well i replaced the coil and then find out the positive red wire that goes to it is not getting any power. I took a test light and all the fuselinks work. I pulled the eec relay off and the red wire is getting voltage. Any other ideas?

 

[HISSIN50]

great. i just got done answering some of that in your other thread.

did you check the links thoroughly? they can burn and not flow decently, but still enough to show 12 volts. did you tug on the ignition one a little (goose test) to see if it opened?

what does the other coil wire read?

good luck.