engine dyno simulater

[coupecop]

i just got this mustang 5.0 performance builder program and wanted to know if any one has used it before and how good is it .. http://www.auto-ware.com/software/meb/meb50pgo.htm :Track:

 

[Flavadave4]

interesting, I have never seen this before.

 

[coupecop]

ya i got it a few days ago .

 

[rockytoohot]

Sounds pretty good. Let us know how it works.

 

[coupecop]

well i have tried it by just changing my heads to ed performer rpm and a aderson n 41 cam i should be at 362 hp at 5800 rpm and 366 torque at 4400 but need to know how much drivetrain loss i need to subtract because hp & tq are at the motor not wheel..

 

[coupecop]

just put in to the new program my set up and it say that i should have 300 hp on they fly wheel * .15 is 255 so it sounds about right .

 

[Flavadave4]

Kinda cool, does it go by advertised HP of these componants or real world results that someone kept track of?

 

[coupecop]

it just calculates depentiong on the combo you can change any thing you whan onit like going from a 302 to a 347 the cam size to the heads depending on the flow

 

[bloopbloob]

that sounds like a pretty neat toy! Do mine! do mine! PLS!!!

 

[coupecop]

i need to know the inf on your heads ,cam what intake you have is your block a 302 306 etc

 

[bloopbloob]

rebuilt 302, all my mods are in my sig. heads are professionally ported, supposed to flow close to 351W heads, whatever that is.... stock cam and intake. how much did this program cost?

 

[coupecop]

it should be around 225 hp& 255 tq but thaqt with 64cc 190/160 thats the spec on the ez7 power ported heads.

 

[85_SS_302_Coupe]

I've got a program, i believe it's called Desktop Dyno....i've tried it a few times but it always seems really optimistic to me. Plus once you factor in things like porting and air quality it really starts getting vague.

 

[coupecop]

i got this for $60

 

[coupecop]

i going to change my set to some performer rpm heads and anderson n-71 can just whant to know if any one has something like it.

 

[ChromdOutDubs]

I have Desktop Dyno 2003 and Drag 2003. You can build the motor in Desktop Dyno then import the engine file over to Drag 2003 and it makes simulated passes based on a bunch of specs you put into the program. I think its pretty sweet.

-AJ

 

[coupecop]

have you tried any of the combos on you car and how close is it