- Jul 16, 2002
- 87
- 0
- 0
ok, im looking to start building a 331 pretty soon
this is going in my street car that will occasionally see a little track time
i am wanting the car to run in the 9s (atleast 9.70s or close to it)
it will have a manual transmission so i may not ever see those ETs but i want the power to do it
i am going to start with a DART block so i know it will handle the power, i will be going with 8.5:1 compression
i have an S-Trim that will be going on it and i plan on pushing it to about 17psi
i already have a custom grind blower cam that my buddy said would work great in it. i dont remember all the specs on it but i believe its around .524" lift
i was thinking about going with AFR 205 heads and an Edelbrock RPM II intake. would 55# injectors be enough or should i go ahead and get 72s? what size Throttle body and Mass Air meter should i run?
it will have a complete Aeromotive fuel system but should i go with the Back Half kit or the Competition kit?
any help would be appreciated, also if anyone has any suggestions for a better intake or heads let me know
thanks
this is going in my street car that will occasionally see a little track time
i am wanting the car to run in the 9s (atleast 9.70s or close to it)
it will have a manual transmission so i may not ever see those ETs but i want the power to do it
i am going to start with a DART block so i know it will handle the power, i will be going with 8.5:1 compression
i have an S-Trim that will be going on it and i plan on pushing it to about 17psi
i already have a custom grind blower cam that my buddy said would work great in it. i dont remember all the specs on it but i believe its around .524" lift
i was thinking about going with AFR 205 heads and an Edelbrock RPM II intake. would 55# injectors be enough or should i go ahead and get 72s? what size Throttle body and Mass Air meter should i run?
it will have a complete Aeromotive fuel system but should i go with the Back Half kit or the Competition kit?
any help would be appreciated, also if anyone has any suggestions for a better intake or heads let me know
thanks