Mass air flow Questions Help me!!!

Jnstang89

New Member
Sep 22, 2003
42
0
0
South Florida
I just got done overhauling my engine and i grabbed some 24 lb injectors froma cobra motor and im currently still running my stock mass air flow sensor. I know its calibrated for 19 lb injectors, but would my car feel slower cause of that and when i put a bigger mass air meter on there and its for 24 lb injectors, do you think i will feel a power increase?
 
  • Sponsors (?)


Jnstang89,

The injector size is calibrated in the EEC. The "right" way to change the injector calibration is to change it in the EEC via a chip.

That being said, the aftermarket MAFs can be 'calibrated' to allow the car to run well with different sized injectors. Pick up an aftermarket MAF calibrated for the 24 pounders and you will be much happier. The car will run PIG RICH with 24lb injectors and a 19lb injector calibration.

Here is some excellent reading on the subject:
http://www.mustangworks.com/articles/electronics/InductionBlues.html
http://www.mustangworks.com/articles/electronics/eecAdaptive.html
http://www.mustangworks.com/articles/electronics/eek-vs-eek.html



Good luck,