i tried searching the forums, but no answer there for me.. this is for an 82 mustang 5.0 which has a 90 ho motor(and yes I took the eccentric out from the old motor and installed it in this one) So, I am not getting any fuel, i have a new pump now, just replaced. and I tried sucking some out from the line coming from the tank- and got a lot! just to check if it was clogged, so then I tried firing it up and still nothing, unhook the feed line from the pump and it was bone dry. it would only fire up and try to run if I put gas into the carb, help needed here guys, thank!:SNSign: :SNSign: :SNSign: :SNSign: