Pic 1). Removed one of the three spacers to drop WOT up shifts by approx 500 rpm. Pic 2). VB assembled and clean. Pic 3). Poured fluid on and let it soak. Pic 4). Tourqued plate bolts to spec 90 in/lbs. Pic 5). VB and filter in and torqued to spec 90 in/lbs.
Before installing pan I verified manual linkage functioning properly. Also had the Mrs push gas pedal through range to verify TV valve travel is sufficient. Fine tuning on that later.
Next....dump fluid in and turn key.
Wow! So much is about to happen at one time. Very excited indeed!!!!!
Before installing pan I verified manual linkage functioning properly. Also had the Mrs push gas pedal through range to verify TV valve travel is sufficient. Fine tuning on that later.
Next....dump fluid in and turn key.
Wow! So much is about to happen at one time. Very excited indeed!!!!!