Jinx,
It sounds like your guide is just what I need for my 95 GT but, I cannot see the pictures! I've tried a number of different links and 2 browsers with the same result. Do you have a copy you can send by e-mail or is there another location where the pictures are visible?
Many thanks,
JHO
Thanks Jinx...everything worked great. The only problems I ran into were
1. Now the car gives an alarm beep for about one minute after I start it up...it did not do this before, and
2. I broke the speedometer needle stop post that keeps the needle from dropping past zero.
Any ideas on either problem?
And thanks again for the information...I would not have attempted this without these detailed instructions!
great write up, But am I the only one who is having trouble with the headlight knob coming off?
Your picture shows some sort of white tab it looks like, mine only has a split piece of metal in the plastic tubing. I've tried everything (prying, pushing, pulling...ect) still nothing. Anyone have any words of wisdom?
As a solvent
Acetone is a good solvent for most plastics and synthetic fibers including those used in laboratory bottles made of polystyrene, polycarbonate and some types of polypropylene.[5] It is ideal for thinning fiberglass resin, cleaning fiberglass tools and dissolving two-part epoxies and superglue before hardening. It is used as a volatile component of some paints and varnishes. As a heavy-duty degreaser, it is useful in the preparation of metal prior to painting; it also thins polyester resins, vinyl and adhesives.