went efi on my 85 coupe last summer and want to get rid of extra parts I have. If any of you guys want to go carb then I have everything you need. This was on a 5.0 roller motor...
-Pro products intake
-edel or holley carbs (600cfm)
-edelbrock chrome air filter assembly
-Carter electric fuel pump (very low miles)
-fuel pressure gauge
-vac advance dist
-duraspark ignition box (blue strip)
all this stuff is in damn good shape, I was carbed for only 2 years with minimal street use. I want to go supercharged so I swapped to efi bc I felt driveability would be better with the car being my daily driver and all. If anyone buys this stuff I will gladly help them with questions and/or wiring....
Not really looking for a trade but might consider following items:
- (2) 15x5 draglite skinnies/tires for fox
- Inner sail panels for foxbody COUPE, have to be black~!
- aluminum (not steel) front bumper support for 4eye fox (only came on early years)
- AFM PMS, doesnt matter which generation
Hit me up if you have any questions or wanna come by and check the stuff out. I live in beaverton/hillsboro
thanks,
Drew
971 404 9396
-Pro products intake
-edel or holley carbs (600cfm)
-edelbrock chrome air filter assembly
-Carter electric fuel pump (very low miles)
-fuel pressure gauge
-vac advance dist
-duraspark ignition box (blue strip)
all this stuff is in damn good shape, I was carbed for only 2 years with minimal street use. I want to go supercharged so I swapped to efi bc I felt driveability would be better with the car being my daily driver and all. If anyone buys this stuff I will gladly help them with questions and/or wiring....
Not really looking for a trade but might consider following items:
- (2) 15x5 draglite skinnies/tires for fox
- Inner sail panels for foxbody COUPE, have to be black~!
- aluminum (not steel) front bumper support for 4eye fox (only came on early years)
- AFM PMS, doesnt matter which generation
Hit me up if you have any questions or wanna come by and check the stuff out. I live in beaverton/hillsboro
thanks,
Drew
971 404 9396