In all honesty, FWIW, i have very little experience tuning carbs, but ive decided this is defenetly the route i want to take... im thinking eathier the edelbrock performer rpm or weiland steath intake... this is going in a 91 ranger.
stock bore 5.0, E303 cam, GT-40P heads w/ springs up to .560 lift, 1.7 roller rockers.
kinda mild, im on a tight budget... i was thinking about a Edelbrock performer 1406 600 Cfm, or a holley street avenger 575 or 675 cfm
Ive heard the holley 600 CFM dubble pumpers are kinda a PITA to tune.. the speed demon 650 is another option, ive heard good things about it... This is NOT my daily driver here, thanks all
Thanks all...
stock bore 5.0, E303 cam, GT-40P heads w/ springs up to .560 lift, 1.7 roller rockers.
kinda mild, im on a tight budget... i was thinking about a Edelbrock performer 1406 600 Cfm, or a holley street avenger 575 or 675 cfm
Ive heard the holley 600 CFM dubble pumpers are kinda a PITA to tune.. the speed demon 650 is another option, ive heard good things about it... This is NOT my daily driver here, thanks all
Thanks all...