Had time to make a dash to the local Pick A Part. For the fine price of $20.82 I hot junk yard treasure.
The mirror came off of a 2011 Subaru Outback and has garage door opener, compass, auto dimming, and camera screen. The vacuum pump came from a 2012? Chevy Cruze. It was buried below the brake booster but submitted to me right before the rain started.
The easiest way to tell if the car has a camera screen mirror is with a flash light. Works every time.
I've got several cameras and will find a suitable one to go in the front bumper. The front end is so low I really want to be able to see the lip as I approach obstacles. Thinking about using a momentary switch mounted in the shifter to activate.
The vacuum pump is for my low vacuum camshaft. Its recommended by CompCams for anyone running the xe282hr. It only pulls 8-9 in.hg. at idle. Makes the brakes a little stiff after a couple hard braking events.
We'll see how this goes. I've got to order a vacuum switch to wire into the included pump relay.
Unless I can control it with my mspnp2. A91what ....what do ya think. Seems I should be able to set up a threshold for cutting the relay on and off wired to appropriate IO. Megasquirt can do just about anything.