engine combo.

[clarkster1]

i have a bone stock 93 lx with 86,000 miles on it, and i stumbeled across a combo. yesterday victor jr. heads fully ported and polished with a gt 40 lower and upper intake also fully ported and polished would this be overkill for a stock 302 or could it be a great combo? the guy that owns it ran this with a paxton s/c with 10 lbs of boost with a custom trick flow cam.....the heads have 2.05 intake valves in them.:SNSign:

 

[GTOreturns]

So pretty much your doing a H/C/I swap?

 

[Cman88]

If I am not mistaken, in order to run those 2.05 intake valves you will need to flycut the piston tops as well or change the pistons. Don't forget that. Otherwise its going to live a short life when you first fire it up.