i have a 306 bennett racing engine it is based on a 6010-A50 block. im trying to find out how many pounds of boost the block can hold? i was planning on around 8psi. i called bennett they said 10psi max but i also know mustangs forcing 18-20 in this style block. bennett said hes seen them fail at 8psi and live at 15psi.
also on installing a vortech i have 30lb inj in my motor now and vortech said i was fine with them and a fmu. i would have to by an fmu. i had another guy tell me i could get 42lb inj and get a custom computer/or chip and get it tuned and not need the fmu. any thoughts on fmu or not?
thanks, paul.
also on installing a vortech i have 30lb inj in my motor now and vortech said i was fine with them and a fmu. i would have to by an fmu. i had another guy tell me i could get 42lb inj and get a custom computer/or chip and get it tuned and not need the fmu. any thoughts on fmu or not?
thanks, paul.