OK I put on my BBK long tube headers like 2 weeks ago and today I decided to finish up and put the rest of my pipes on. So I get my BBK h pipe (bought the set casue I dont want mounting problems) so I go to hang the hpipe and that **** dont line up for nothen the hpipe dont fit into the hangers at all, one hanger bracket on the pipe hits the spedo cable and the flanges dont even line up to the headers. I checked the part numbers but there is only 1 part for the foxes and the 94/94 5.0s
I will mess with it more in the morning but if any one has had the same problems let me know and how you fixed it.
On another note when I removed all the old stuff I did find that the hangers on the on the old h pipe were cut off. Not sure if there are diff hanger brackets that mount the the trany. I have a new trany bushing guess I can put that in I guess it could be that the on in there is letting it hang down to far.
I will mess with it more in the morning but if any one has had the same problems let me know and how you fixed it.
On another note when I removed all the old stuff I did find that the hangers on the on the old h pipe were cut off. Not sure if there are diff hanger brackets that mount the the trany. I have a new trany bushing guess I can put that in I guess it could be that the on in there is letting it hang down to far.
