Search results

  1. lancec2c30

    Megasquirt Ignition Question

    I've been tuning my s trim car with tunerstudio. Im starting to do some wot pulls and I think Im getting detonation on the top end. But my timing under boost is only 20*. What I don't know is if tunerstudio or the megasquirt takes in account the 10* of base timing in the dizzy? I know a few guys...
  2. lancec2c30

    Blown up new edge gt, Question

    I've been eyeing a 2002 gt on craigslist. It's navy blue, has black leather interior. 88k and a clean title. He says it has a spun rod bearing, the car appears to be fairly clean. I just don't know what its really worth. He says he is firm at $2700, but I could probably talk him down to at...
  3. lancec2c30

    Complete Moates Quarterhorse package w/ laptop

    I've got a moates quarterhose chip for any eec-iv ecu. Along with Binary Editor tuning software and EEC analyzer datalogging software. Because you can't transfer the programs, I'll include the laptop I have the programs loaded on to. It's an Acer aspire 3800. I'd like to get $425 for...
  4. lancec2c30

    Megasquirt, who's got it?

    So I'm thinking my h/c/i car will be getting an s trim in its future. As far as tuning goes, I have a moates quarterhorse I've been using. But I don't like dealing with 75 different fuel and spark tables. And I think the maf design is more of a hindrance than an advantage in a boosted...
  5. lancec2c30

    Car won't hold idle

    Ever since I did my trick flow H/C/I, my car won't idle, and the driveability is garbage. Car has stock MAF, stock injectors, and stock FPR. No egr. I've tried running it with my chip (egr disabled) and without it. I've only been seeing 8-9in of vacuum at 700rpms. Which I would think had...
  6. lancec2c30

    Trick flow heads smog ports

    I got my trick flow h/c/i installed, I plugged off the ports in the back of the heads for the smog. But I didn't realize they also have the ports on the front. Now, I've got the plugs to fix the issue. My question is will it be alright to hot rod the car around some beforehand? I'm unsure if...
  7. lancec2c30

    Trick Flow lower, whats up with this?

    I pulled out my trick flow lower, and saw this. How does this get past final inspection?
  8. lancec2c30

    Long tube install, whats easier?

    I've got my engine torn down to the short block in the car. My H/C/I came in today, but my longtubes won't be in till next week. So I was wondering if it's much easier to drop the headers in place before putting the heads on? Do you get to avoid loosening motor mounts and what not? Or...
  9. lancec2c30

    On3 performance fox body turbo kit for sale

    I'm taking a different route with my car. The kit has about 20 miles on it when I was street tuning it. It's not the regular kit, has y pipe, master power, and maf. I'm in Chehalis Washington, looking for a local sale only. Here is a copy of my posting on Craigslist. Thanks for looking...
  10. lancec2c30

    Top end noise?

    I've been trying to determine what the culprit of this top end noise is for a few months now. I finished my turbo install, then shortly after blew a head gasket (uneven deck surface). I fixed that, got the motor back together, then shortly there after had this noise start. It sounds like its...
  11. lancec2c30

    Top end noise

    I put new head gaskets on my car because of a failure about a month back. Shortly after, I noticed a tap in the top end. I assumed it was a rocker or push rod problem. But none of the rockers were slacked, and all the push-rods were straight. So my next guess would be a faulty lifter, but...
  12. lancec2c30

    Overheating/Water issues

    I just got done installing the turbo system on my car, I took it around the block last week and noticed when I got back, some coolant had boiled out of the radiator. Today I looked into it, I thought one of my head gaskets had let go. The temperature would come way up at idle, and when you...
  13. lancec2c30

    Another Turbo Fox Build Thread

    I've had my car almost a year now, it being a busted *** 4 banger when I got it. The big goal I had in mind ever since buying it was to go turbo. Finally it's time to meet that goal. :D Yesterday I got my first box of parts in the mail. Actual turbo setup should be here mid next week or...
  14. lancec2c30

    V8 front brakes complete w/ spindles

    I've got the complete 4 lug front brake setup and spindles off my 87 5.0 car. Comes with spindles, calipers, rotors, pads, dust shields, and hoses. $60 OBO + shipping.
  15. lancec2c30

    AC/Power steering bracket

    I just did the a/c delete on my 92 and have the steel plate, along with the smaller steel, and aluminum bracket that the a/c and power steering mount to. Looking to get $20+shipping for it all. Picture:
  16. lancec2c30

    Car cranks but won't start

    I just finished up running part of the engine harness into the inner fenders, to clean the bay up some. But now with it all back together, the car won't fire. I went through the checklist, but it didn't help me find the problem. So with the key on, I do hear the fuel pump prime. I also...
  17. lancec2c30

    Steering Rag Joint

    Where are you guys finding replacement rubber rag joints for the steering shaft? I looked on Summit, Rock Auto, and Ebay with no luck.
  18. lancec2c30

    New wheels & Lowered the Notch

    My 17x9 cobra R's were in pretty sad shape, and with the rear disk setup, I couldn't drop the rear much without serious tire rubbage. So, I picked up these 17x8's on Craigslist for cheap and finally lowered the car. Let me know what you think. :nice:
  19. lancec2c30

    Door lock troubles

    I have been trying to figure out why my drivers side door lock switch doesn't work. Both door locks will work fine, but I can only use the passenger side switch to engage them. I pulled the drivers side switch out and tried using a jumper wire on the terminals to get the locks to work. But I...
  20. lancec2c30

    Camber Changes

    I was curious if anyone knew how sn-95 spindle swaps effected camber. I just finished up my 5 lug swap, I didn't change ride height from before. I am about to set something up to fix my toe some, but I don't have a camber gauge to decide if that needs to be adjusted any. So if anyone knows...
Top Bottom
Back
Forums
Menu