Search results

  1. T

    MAF And IAT

    Ok, I just got my pro-m pro-tube the other day and it is of the 6 pin type, now I have the adapter for our cars down to the 4 pin. My question, the other 2 pins is a built in IAT correct? If so Can I cut the wires going to our IAT and put them in with this built in one and if so which wires...
  2. T

    Fuel Sump?

    Haven't been on here in awhile.. finally starting to get back to a point where I can work on my car again. So here's the question.. Do I really need a fuel sump? Or can I just use one of these nice pickups like this one: Glenn's Performance My reasons for this is because first off I have a...
  3. T

    Havent Been Around for awhile.. New pics!

    Took some new pics of the car today :) http://www.flickr.com/photos/21137218@N07/2600093205/ http://www.flickr.com/photos/21137218@N07/2600925350/ http://www.flickr.com/photos/21137218@N07/2600095613/ Hood painted finally, new headlights, and some polish :)
  4. T

    PCV Question

    wow its been awhile since ive been on here, anyways, got the mod bug agian, looking at a lower intake and it doesnt have a pcv hole on it, is it ok to just do away with pcv or is there another way for this to happen?
  5. T

    Bad Alt. Or what?

    Ok so heres the deal, When I first fire up the car and start to cruise the voltage is like 13.5-13.7, after awhile of driving, the voltage slowly decreases down to like 12.3-12.5, then stays there the rest of the time, I think it has something to do with heat but idk. whatca guys think?
  6. T

    94-95 Specific Tuning

    (Below Is the basic format I was thinking of This Is still under contruction and I need help of others to get this going. I need Input of what threads need to be added, possibly what links need to be added, suggestions on what would make it better, anything you guys can think of, Ill be editing...
  7. T

    Low Impedance Fuel Injectors Q's

    Well, I was browsing around for some injectors for the project ill be workin on over the next few years (351w twin turbo) And I was looking at some big injectors, now the ones we have in our cars now are the high impedance right? the High Impedance ones go up to 75# injectors, but are pricey...
  8. T

    Mustang Show Pics (Low Quality)

    Well I wish I had my good camera but I didnt know about the show and only had my camera phone, heres a few pics: :flag:
  9. T

    I smell Anti-Freeze

    Ok, for a little bit now ive smelt anit-freeze inside my car, if you turn on the heat it gets really strong for a mins or 2 then goes away. Coolant level is staying up, ive been checking it often. Does my heater core have a slow leak or is something else wrong? If its the heater core how...
  10. T

    Drilling Fuel Injector Holes?

    Ok, with my eaton set-up I just ordered a carb intake that said it could be drilled for fuel injectors, Now looking at my intake it appears to be a 3/8" hole straight thru with a 1/2" hole a little ways in for the injector to sit in. Now my question is, And I think I can, just drill them in very...
  11. T

    Weight jacker lower control arms.

    Good or not? Also if I get them whats ideal for drag racing, dropped as low as they go? or jacked up? Saw these, pics look like good quailty what do you guys think? http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_753297_-1_10441 thanks!
  12. T

    well, went to the track...

    Kinda dissappointed in what she did, but the belt was slipping pretty bad on the blower, it was losing boost past like 3500 or so, would drop to around 5 psi, with it at 8 or so at 2 grand. So losing at least 30hp in the upper end, couldnt get traction ethier. It ran a 8.9@80mph with a 2.1...
  13. T

    Input psi?

    I see on calcon where it can log psi... how do I get it to log that? I know I probly need a sending unit.. but where can i get one of those, i searched a little, found one on jegs but its $70 and I dont know how i would input it into the ECU. Im looking for a cheap alternative to that and how...
  14. T

    Low Quaility Burnout vid :)

    decided to smoke some tires last night :flag: Both of these doen on camera phones so bear with it, good vids coming soon once the weather is good agian. http://s47.photobucket.com/albums/f166/tclaygst/?action=view&current=V_00283.flv Heres a day pic of part of the marks, they...
  15. T

    Drag Springs and driving

    Ok, im thinkin about gettin those Eibach drag launch springs with the airbag in the one rear spring, my question is how is normal street driving, occassionally i like to take a few turns but nothing serious, my main thing is drag racing, just wondering how they handled on the street. Need to...
  16. T

    Track Soon!!!!

    the local track opens up and the first test and tune is next wensday (28th), its only the 1/8th but i cant friken wait! Hoping for low 8's That is all. Just wanted to share my excitement of the track finally opening back up. :nice:
  17. T

    Idle Help, I know, but different...

    Ok, I Adjusted the ISC neutral Idle airflow to what my car puts out. Heres what I did: I warmed up the car, Disconnected the spout, disconnected the ISC, set the throttle body to where the screw touched then one more full turn as per EEC analzyers instructions, data logged from around 675...
  18. T

    EEC Analyzer Hp/Tq Estimate. Accurate?

    Dunno how accurate this thing is, but heres what it put out for my car, probly waaaay off Has anyone tested thing thing agianst a real dyno? I know its puttin out flywheel numbers, just curious. Dont mind the little spike at the end, has some throttle lift
  19. T

    Very Short Vid! M90

    Ok well, this is my first video of the car, its very short about 5-10 seconds of a little acceleration, I was attempting to film it and drive at the same time, I deemed it to be dangerous lol, need someone to tag along. But anyways, heres a SHORT "Teaser" vid of my eaton m90 stang...
  20. T

    DIYWB help!

    When data loging tweecer is seeing 10.00 AFR flat at WOT, my gauge is reading 11.3-11.9, I lean it out some and my gauge shows the change but in tweecer its still 10.00 flat, I wanna know what to do, cus i dont wanna keep leaning it out for the value in tweecer and damge my engine, cus im...
Top Bottom
Back
Forums
Menu