Search results

well guys , my car shut down while cruising on the freeway the other day. it cranks but it doens't start or fire up. theres fuel but no spark. i changed the ICM, but no go. whats the best way to check if the coil packs are bad? i want to check for power at the coil connector? or...

I've searched on this topic and i couldn't find the answer. well i have a 91 4cyl mustang. i want to drop a 5.0 engine in it. i want to keep the airbag functional on the car after the swap is done. would the 90-93 5.0 mustang engine harness work for my purpose, since they have...

I have an 88 5.0 Mustang. I recently converted it to mass air. I pulled some codes and got codes 41 and 91. so i went ahead and bought new o2 sensors, because i was getting bad gas mileage. i installed them and i reset the codes. I pulled the codes again and it still gave me codes...

most of the times when i crank my 91 mustang 2.3 in the mornings, I hear the starter disengage early from the flywheel and just spin. sometimes it takes me 2-3 tries to get the car started. this happens when the car is cold or has been sitting for more than 4-5 hours. when its warmed it...

I have a 91 2.3 Mustang. I get codes 223 and 224. sometimes the check engine light comes On and the tach only reads out half of the RPMs. The previous owner told me he had a new coil pack installed. (The Front One) because the car was sputtering. it doesn't sputter, but bogs a little...

does a T5 from 95 Gt Fit in to a Foxbody 87-93? thanks

My 89 Notch has some front end damage. I have this guy selling his fenders, radiatior support, bumper off his 93 LX. do those part fit Ok? i know that 91-93 Mustang fenders are wider than 87-90 Mustang thanks

I know 94-97 cobra rims fit , meaning clear the dust cap. but what other options of rims can i get ?? thanks

Since i bought my car, i noticed that that when i turn the steering wheel all the way doing a U turn either to my left or right , the inside of the wheel and tires rub on the arms. The weights on the rims are have a deep scratch. what can i do to fix this??? Thanks guys PS: i just...

i notice that sometimes my temp gauge would move up in traffic. and also now in 75 F degree weather. I notice that the car doesn't loose coolant and the coolant is full to where it says "Full hot" On the resevoir, this is when the engine is cold in the mornings. Also i noticed that my...

i want to replace my ball joints on my 89 mustang. i see that summit has Ford Front Control arms.they come with ball joints Does anybody know how easy is it to install the a arms? thanks

like the title says. I'm trying to order the Hyperflex kit from summit. My strut bushings are bad. the summit part details just says that the kit includes front and rear shock bushings. just to be sure are these the same? thanks

Ok, I noticed that my a/c lines that go to the compressor are always cold. the a/c seems to be operating even if i haven't turned it on. is this bad? how can i solve this? I already tried to disconect the electrical plug on the compressor. thanks

I'm about to order energy sway bar bushings , but theres a greasable bushing and non-greasable is the stock non- greaseable?is the stock sway bar size 1 5/16? this is going on my 89 LX Also what size End links do i need? thanks :flag:

Today I noticed underneath the car that the driverside part of the sway is missing the bushing. take a look at the pic. My car makes poping noises when i go over bumps and holes in the front end. BTW the has 171,XXX maybe all if the bushings are bad. should i buy the Energy hyperflex master...

well a week ago i noticed that my check engine light came on and off while i was driving the car , also i my cold start idle was a little rough. well today i pulled the codes and it everything was all good, i got code 11 but in the continous memory part i got code 31 which: 31 (orc*): EVP...

I going to upgrade my alternator to a 3g one. I'm buying the kit from Pa-performace, but i ran into a problem with the order. do i need a Premium Long Power wire ?? or a Short one?? it asks me to select http://www.pa-performance.com/display.asp?sku=7 what did you guys select to be...

My stock Calipers are leaking from the piston and I'm try to buy replacements for them Do I need a new Master Cylinder with 73MM calipers? Also if i get the 73mm calipers, do Brake pads that would go on stock 5.0 Calipers Fit in the 73mm Ones?? thanks

yesterday I noticed that the Volt gauge on my 5.0 was almost getting to the red, this was a idle ,so Today I bought a new battery. The new battery help very little. I read on previous post on how to test your alternator, which said to disconnect the positive terminal from the battery while...

I recently bought an 89 Coupe. The Runs great no leaks clean interior,but the previous owner told it needed shocks and struts bad. I tested the car out and everytime we went over a small bump or hole i hear this clunk in the rear and sometimes in the Front , Kinda like it bottoms out. I was...