Search results

  1. bertman

    Electrical Where Is It

    In the pic that i posted, can anybody tell me where that risistor is and its purpose. I have an 87 mustang. Just curious
  2. bertman

    Engine Belt Routing

    The 74.5 fit great. Started my car for the first time in 6.5 years. Been slowly putting it together. Runs great. Have a few things to finish up still before it road ready. I was pretty happy when it fired up
  3. bertman

    Engine Belt Routing

    75 fit but not tight. Got a 74.5 going to try it tonight. Stock pulleys. Love those pics mikestang63
  4. bertman

    Engine Belt Routing

    Can anybody tell me what belt i need. I have A/C eliminater kit and it moved the PS pump up to where the A/C was. Summit told me what belt to use, but its not right. I have no smog pump either. The belt is 84.5 inches and its to long
  5. bertman

    Forced Induction Injectors

    Running 24Lb injectors. E303 cam. 351W heads. 1.7 roller rockers
  6. bertman

    Forced Induction Injectors

    I know your supposed to have a certain size throttle body, MAF and injectors. Its supposed to a watch set. Can somebody help me and tell me where i can find it. Its been a long time since ive been up here. Thank you
  7. bertman

    88 GT vacuum/hoses question

    The second pic you posted is the smog pump hose. Do you have a smog pump on the car. This is a very good website for your other vaccuum line questions
  8. bertman

    Rear Suspension

    I have seen a little shock on the rear end. It bolts the top of the rear end and bolts to the wheel well.My car is a 87. I dont have them. I saw it on a 91 stang the other day. It looks factory. Im not talking about the control arms or the rear shocks. Does anybody know what they are called and...
  9. bertman

    Driveline vibration

    What kind of tranny do you have in it. I would check the u-joints and if they are fine than have the driveshaft checked for balance.
  10. bertman

    Cam question HELP

    I would call summit. Are you using the stock rockers and and the stock pushrods. What kind of rear end is in the car. What is the specs on the stock motor. Or you can get an E303 cam for it.
  11. bertman

    Cam question HELP

    That motor should already have the GT40 heads. Which are great for mustangs
  12. bertman

    ignition wiring help

    The white and pink is the ign. start wire. Also the directions should come with the push button.
  13. bertman

    Cam question HELP

    What size motor was in the explorer first
  14. bertman

    ignition wiring help

    You will love thie websiteMustang FAQ - Engine Information
  15. bertman

    cylinder head id need help

    The casting number should be on the bottom of the head.
  16. bertman

    C4 experts, easy question

    That servo cover takes a gasket. But if take the cover off be careful cuz you might lose the band and that band is second gear
  17. bertman

    MAF Conversion

    :shrug:I have an 87 stang. Car had a but load of wiring issues. I replaced the ECM main wiring harness and the wiring harness behind the dash. Both came out of a 93 5.0 Will I still have to do the MAF conversion. I have an A9L computer.
  18. bertman

    HElp Clutch is screwed

    If its a stock cable pull up on the clutch pedal. You will hear it make a ratcheting sound
  19. bertman

    clutch chatter

    All mounts checked out fine trans mount is new. EQ bar was fine also. I know clutch is installed properly. Talked to customer about it and he said that its done since he got it. Even before he put all the money into it. I was told try to go back to the 3 finger pressure plate instead of the...
  20. bertman

    clutch chatter

    Brand new clutch. Rear main is good. No oil leaks. $40,000 in this car. I will check the eq bar and mounts and I will let you know.