Search results

  1. 1

    Some pics of my black 2011 GT :)

    How did you get that rear spoiler option? I have been using the builder on the Ford site, and can only seem to see the pedestal spoiler.
  2. 1

    Driveline vibration

    I am having the same exact problem....I have stock uppers with poly bushings, MMS lowers, poly trans mount, and new FMS aluminum driveshaft that was changed to try and fix the vibration. Mine starts at 75mph and get progressively worse with higher speed........:shrug:
  3. 1

    H/C/I ?'S

    I second staying away from the FMS "letter" cams. Pay the extra $$$ and get you a cam ground for your specific setup. You will not reget it.
  4. 1

    Best bang for buck: SC or heads?

    Just my .02....ready for the lame saying........ You cannot build a good house without a good foundation. Work the motor over first then boost it. Once you put the SC on you will be tempted to continuously up the boost....result...blown head gasket or worse. Then you get to tear it all...
  5. 1

    PMS Tuning basics

    Hello all, I have been in the dessert for some time. Now I am back and recently purchased a used PMS tuner for the Stang. I am interested in setting up two tunes. One for N/A and one for the track when I spray Nitrous. I have not ever used one of these tuners. I here the PMS is easy to...
  6. 1

    Dumb Question....Checking Vacuum

    Thanks for the link....nothing like some basic explanation to clear things up.:nice:
  7. 1

    Dumb Question....Checking Vacuum

    Thanks for the help. I am going to mess with it some more tommorow before work.
  8. 1

    Dumb Question....Checking Vacuum

    I am having idle problems, and suspect a vacuum leak. I purchased a the vac pump with gauge from O reily. Heres the dumb question. Where should I connect it to see overall vac the engine is producing. I uderstand how to apply pressure/vac to various places and see if it holds in order to...
  9. 1

    How do I fix TB Whistle...

    Does the Accufab NOT whistle?
  10. 1

    How do I fix TB Whistle...

    Thanks for the info. I will check for the Vac leak and see if maybe the TB is not seated well. What would happen if I ported out the IAC holes some. By this I mean so that it is not a straight 90 deg turn...more like a 45????
  11. 1

    How do I fix TB Whistle...

    I recently installed a PP 75MM TB and EGR Spacer along with a C&L 76MM MAF and power pipe. I have not had much time to mess with the car until today. I also have a LC-1 Wideband AFR monitor hooked up. When I start the car is idles very rough which I believe to be due to the TPS and Idle...
  12. 1

    What are these screws for?

    Thanks for the info. I am going to mess with it some in the morning. I will post up the results.
  13. 1

    What are these screws for?

    I recently replace the throotle body, egr, maf, and pipe on my coupe. when I was changing over the throttle body, and installed a new IAC valve I noticed the small plate in between. The alan screws were all the way closed. I opened them a little. Now when I started the car it Idles at about...
  14. 1

    Best Ignition for the Stang

    I called MSD today and talked with the Tech dept for a while. I have decided to go with a Digital 6. I believe it is the "Best" option for me and I will not have to buy another one no matter the mods I do with my car. I will mount it under the passenger seat in order to keep it out of the...
  15. 1

    Best Ignition for the Stang

    DDEREK I think you misunderstood....It was posed as a question about the 4k run out. I am looking for specific information as to why everyone seems to run MSD. In your case you ran a Digital 6, Dizzy, Coil, and Wires all from MSD. Was there a specific reason you chose that, or did you...
  16. 1

    Headers Question

    I bought the MAC ones....POS...very hard to get to seal properly! I did some research on this also and decided to go with BBK....to me it was the best value, and the solid flange ensures a good seal, and I have enver heard anyone complain about the longevity. Spend the extra $$ and get the...
  17. 1

    Best Ignition for the Stang

    That is a good idea in order to better understand the differences. I am sure they will say there stuff is the best. I am also looking for opinions/experience from the members here.
  18. 1

    Best Ignition for the Stang

    I was reading through some of the decriptions in the latest Summit catalog July-Aug 07 Edition. Example: Accel digital ignition says muti strike sparks up to 2500 RPM, Summit Brand: strongest spark below 3000 RPM. I am just looking for the best option. I will pay the extra money in...