Here's what I'm going to do in place of the lower quarter grilles. I thought about the shelby scoops but wanted something different so I came up with an Idea to make them into a functional air extractor vent to take advantage of the high flowing kick panel vents. I used the actual piece to layout the cut out and bend lines. It took about an hour of hammer-and-dolly work to match the contour of the original piece. The next step is to make a pattern for the interior of the air extractor vent.
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=796fre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=11ddre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=e1c3re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=e170re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=796fre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=11ddre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=e1c3re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/rjcassel/detail?.dir=54aascd&.dnm=e170re2.jpg&.src=ph