I have been looking for something nice, something clean. A larger engine and suspension mods are a plus for me too... as long as its quality components. But NO rust or body dammage and I want a non ripped interior but Foxes in that condition are just outrageous in their prices! People asking almost tripple book for a stock 125K car!
I had opened my search to the 48 states but still... its frustrating.
I have found a few I like but man they are expensive. I like this one alot but dont think I could get him under $8000
View attachment 254210
I had opened my search to the 48 states but still... its frustrating.
I have found a few I like but man they are expensive. I like this one alot but dont think I could get him under $8000
View attachment 254210
Mustang LX Leather Interior MSD Distributor Dart Heads Super chip Trick Low R intake Dyno Tuned 360HP @ wheels Saleen Spoiler This was on it when I purchased the vehicle a year ago. It s been painted Infinity G35 medium metallic silver. The paint job is about 4 years old. Here is a list of the new or aftermarket parts installed: Under the Hood: Bottom of motor has about 75,000 miles and top about 3,500 miles/BBK chrome cold air intake kit/K&N Filter-charger mounted in fender well/C&L 76mm mass air meter/Professional Products 70mm throttle body/Ported and polished Ford Racing intake/Ford Racing 24# COBRA fuel injectors/255 LPH Bosh fuel pump/Liquid filled fuel pressure gage/Aero motive fuel pressure regulator/10.5 Ford Racing King Cobra clutch kit/Performance Alternator 3G 200 amp alternator/MSD 6-AL Ignition, MSD TFI blaster coin and MSD /rotor set at 14deg BTDC/Ford Racing 9mm plug wires with Denso iridium /spark plugs gapped @0.055 /Ford Racing Billet smot pump delete kit/ Ford Racing high volume oil pump, windage tray and deep sum chrome oil pan/Ford Racing high water pump with chrome radiator pipes Ford Racing B303 CMAGriffin aluminum radiator with a Proform 15 electric fan kit and 180 degree thermostat/Comp Cams roller rockers (the red ones)/BBK aluminum Power Pulley/Chrome valve covers/All built on a low millage stock block. The previous owner of the motor said the heads were ported but I can t confirm. I conducted a compression test, the lowest was 150psi and the highest was 162psi with not leak down. Exhaust:BBK chrome 1 5/8 long tube headers with Fellpro gaskets/BBK 2 Off-road X pipes/Dyno max 1 chamber mufflers with dumps/ Exterior:19 x 8 polished Saleen style wheels/265-35-18 Dunlop 700 sport tires/with less than 4500 miles 235-35-18 Dunlop 700 sport tires with less than 4500 miles/New door hinges, handles and power window motors/1 piece head lights