86 Lincoln Mark VII 73mm Calipers in 86 Capri...SS Braided Hoses?

[Mikey1968]

Hello,
I have 86 Lincoln Mark VII 73mm calipers in my 86 Capri 5.0L that I changed spindles, rotors and master cylinder. I would like to put in stainless steel braided hoses to the front calipers. Anyone know if the 87-on-up Mustang stock brake stainless steel braided hoses will fit?

If not, anyone know where I can track down ss braided hoses for the 86 Lincoln Mark VII?
Thanks,
Mike

 

[ram360]

I use braided stainless lines for my 73mm calipers on my 88GT. The 87+ should work for you

 

[Mike92GT]

Check out the stainless lines from Maximum Motorsports. Tha's what I used on my car with my 73mm calipers. They are the best lines on the market IMHO.

 

[Mikey1968]

Did you guys have to use any special adapter fittings? My current hoses fit directly with no adapters.

 

[Mike92GT]

If I recall correctly they were a direct bolt-on

 

[ram360]

Direct bolt on for me as well

 

[Mustang5L5]

SS hoses direct bolt on.

You could specify hoses for an '86 SVO. Same front brake setup as you current have (minus the 5th lug)

 

[Mikey1968]

Thanks guys!