getting a 1/4 In. Air Compressor Filter how do I...

[Prince95GT]

hook it up like what way does the arrow go?

this 1:
http://www.homedepot.com/prel80HDUS...Yes&N=2984+3966&CNTKEY=misc/searchResults.jsp

 

[HISSIN50]

The flow comes out of the PCV valve and goes to the intake.

 

[Prince95GT]

also what connections will i need?

 

[HISSIN50]

The link didnt work for me. Your separator (if the 20 dollar variety) probably has 1/4" NPT fittings. 3/8" barbed fittings for the hose works (so get 1/4" NPT x 3/8 barb fittings). They're cheap at the home store.

Good luck.

 

[Prince95GT]

The link didnt work for me. Your separator (if the 20 dollar variety) probably has 1/4" NPT fittings. 3/8" barbed fittings for the hose works (so get 1/4" NPT x 3/8 barb fittings). They're cheap at the home store.

Good luck.

thanks

 

[Prince95GT]

k i noticed that the PCV hose goes to a t fitting where it splits 2 different ways.... what side do i put the filter on?

 

[HISSIN50]

The separator goes in-series in the line that goes from the PCV valve to the T behind the upper intake. That way the dirty air coming out of the PCV valve gets filtered before it gets to the Tee and spreads into the intake.

 

[Dan95-5.0]

yo nick, where did you get your oil seperator from? in town?

lookin for one

thanks

 

[Prince95GT]

yo nick, where did you get your oil seperator from? in town?

lookin for one

thanks

Hey Dan!
I got it from Canadian Tire, I think it was around $30. Its a Campbell Hausfeld