Hey guys, I have finally gotten all the parts to do my H/C/I swap on my car. But I have a few questions that i would like your guys help with.
1st, the oil pan gasket, and rear main seal leak pretty badly, I want to just re-gasket the entire thing. Is it easier to just pull the motor out by itself or to pull the motor and transmission as one?
2nd, The car will have 1.7 cobra pedestal mount roller rockers. My question is will i ever have to readjust them? I've heard that after you install them and get your motor warm you should go around and re-torque them to quiet them. Will they get loud if i install them properly from the start?
3rd, the entire combo will be ported gt40 heads, ported gt40 intake, 70mmtb, 75mm MAF with 24lb injectors, UD pulleys, tfs stage one cam, and cai. Is there anything I am missing that will make the combination better? This is really just a little side project I want to do for fun. But if there is something that dose not match well with the combo then I will be willing to switch it out. But i would like to pull as much power as possible from the gt40 set up. Is there anything i could do to maximize the power from this combo?
I'm sure i will have more questions as a get further into the process but you guys have always been helpful. Thanks you!
1st, the oil pan gasket, and rear main seal leak pretty badly, I want to just re-gasket the entire thing. Is it easier to just pull the motor out by itself or to pull the motor and transmission as one?
2nd, The car will have 1.7 cobra pedestal mount roller rockers. My question is will i ever have to readjust them? I've heard that after you install them and get your motor warm you should go around and re-torque them to quiet them. Will they get loud if i install them properly from the start?
3rd, the entire combo will be ported gt40 heads, ported gt40 intake, 70mmtb, 75mm MAF with 24lb injectors, UD pulleys, tfs stage one cam, and cai. Is there anything I am missing that will make the combination better? This is really just a little side project I want to do for fun. But if there is something that dose not match well with the combo then I will be willing to switch it out. But i would like to pull as much power as possible from the gt40 set up. Is there anything i could do to maximize the power from this combo?
I'm sure i will have more questions as a get further into the process but you guys have always been helpful. Thanks you!