Search results

  1. anthony05gt

    New Vid: BBR Stage 2 Billet Cams

    Here's my car with the billet cams, Whipple, JBA longtubes, JBA catted H-pipe, and Zoomer's axleback. YouTube - BBRCams
  2. anthony05gt

    Auto to Manual Trans ''How to'' guide

    This manual was completely lost. I found my notes and re-wrote it with help from a couple of guys that had previously used it and saved important information. Read it very carefully before getting yourself into this swap. (1) 5r3z*7a512*a> tube (hydraulic hose) (1) 5r3z*2455*b> pedal assy...
  3. anthony05gt

    J&M Products Rear Suspension Results

    Yesterday I finally got around to installing my new J&M LCA's, adjustable upper, adjustable panhard bar and Steeda relocation brackets. My buddy has this same set up and Bigcat had recommended it to me more than a year ago. My first impressions are how extremely quiet the J&M design is...
  4. anthony05gt

    3 Valve Cam Tools

    I know a lot of you guys know about the outrageous price on the install tools for cams. I just want to let you know that I can get you the timing chain wedge tool very (extremely) cheap. Not trying to make money here, just hooking up fellow stangers. PM me on this matter.
  5. anthony05gt

    Advice For Adjustable Release Bearing

    If you have an adjustable release brg in your bell housing I just want to share what I've found. When I installed it a few thousand miles ago I had the TB adjusted .150'' from the pressure plate diaphram. They get you to do that to allow for clutch wear as the diaphram will protrude out towards...
  6. anthony05gt

    2010 Mustang Video

    I don't know if this one is here on the forum yet, but check it out. 2010 Ford Mustang Unveiling- Video
  7. anthony05gt

    Ram Release Brg Trouble

    I just installed a Ram release brg in my son's '05 along with a Centerforce DFX set up. I bought it from JPC where I always get my parts. Justin called me and warned me before I installed it about some of the units having knicked o-rings from possible lack of lubrication or hasty assembly. I...
  8. anthony05gt

    Custom Aluminum Quarter Window Scoops

    Some of you know that I made a set of 60's style vented scoops for my quarter windows a while back, but I have an original design which have just been installed in my son's '05. Purely asthetic, but very cool IMO. Check them out.
  9. anthony05gt

    Zoomers Exhaust

    I sold my Magnaflow Mufflers and installed Zoomers axle back along with my JBA LT's and JBA catted H-pipe. The first vids are my car. The second set of vids are my son's '05 with Zoomers axleback only. http://www.youtube.com/watch?v=EgtnD3Oy3Sk&feature=user...
  10. anthony05gt

    McLeod Adjustable Slave/Brg Installed w/pics

    I installed this McLeod adjustable slave/brg combo on Wednesday. My Centerforce dual friction clutch didn't hold up to the Whipple so I switched to the Centerforce DFX disc which really bites down hard. You'll see in the pics that a hole must be cut out of the bell housing at a lower point...
  11. anthony05gt

    GT500 LCA's on a GT

    I was lucky enough to score a set of take off GT500 LCA's cheap to try on my GT to see if they would be a happy medium for wheel hop while still retaining a decent NVH level. I see Moss Mustang sells them and claims the bushings are a stiffer durometer. That seems to be BS. Here's their page >...
  12. anthony05gt

    Justin Burcham 9.05 MM&FF Shootout pass

    http://www.youtube.com/watch?v=AUoGIdAkwkU This is Justin Burcham breaking his own 3-valve Mustang world record. This is the fastest 3-valve stang in the world. Blower pipe blew off@1200ft and she went fat.
  13. anthony05gt

    Painted my cam covers (pics)

    Old Ford blue
  14. anthony05gt

    No more scratched tint!

    I read on another forum where a guy replaced his door weather stripping ( the weather stripping across the top of the door) with '08 model year strips which are different. It does not scratch the window tint and it installs in about 20 minutes. You do have to partially lift the door panel off to...
  15. anthony05gt

    Whipple/Procharged cars tuned at JPC Racing

    My son and I went to JPC Racing yesterday for a dyno visit with Justin Burcham and Kevin MacDonald with both '05 cars. It was a cool day in the 40's near sea level so we're talking about some good #'s on these runs! My Whipple car topped out at about 10.5 lbs boost 534.3 rwhp and 502 rwtq...
  16. anthony05gt

    Whipple install....leaky intercooler

    I spent all day Saturday and half of today installing the new Whipple kit and it was just going too damn good because after letting it idle for about 4-5 minutes I noticed a coolant leak at the base of the compressor housing where it is bolted to the casting that the intercooler is housed in. IC...
  17. anthony05gt

    Blower install?...word to the wise

    Just figured I'd put my experience this weekend out there. I pulled my Procharger system off and installed it on my boy's '05 this past weekend. My car was running great at 11 psi, no problems at all at 9k miles. His car has almost 30k miles on it and ran perfect before the install. After I was...
  18. anthony05gt

    Setting The Record Straight

    Setting The Record Straight I just received my November copy of 5.0 Mustangs and Super Fords today. I see they have an article titled ''Stick Shifted'' written by KJ Jones giving Todd Uzzell and Mike Akerlund of www.bieberfever.com credit for the 1st S-197 automatic to manual transmission swap...
  19. anthony05gt

    Those who switched to a 6-speed

    I'm doing a tranny swap for a guy who is going from the auto to a 3650 (stock) 5-speed. I'm looking for the linkage arm that goes from the bottom of the shifter to the spool on the transmission. Any help?
  20. anthony05gt

    New Grille

    This is my new grille from Shelby International. I fabbed up the trim rings out of 1/8'' aluminum around the driving lights. The pony emblem is a metal reproduction of the '66 GT350 grille emblem. I have the first grill they sold for the V-8 GT cars and paid $160 for it and $190 for the PIAA...
Top Bottom
Back
Forums
Menu