I just finished installing my new engine. I tryed starting it and it will not fire up. I have spark, removed the spark glug wire and the spark is jumping across to the plug. So I know I have spark. I have fuel, depressed the shrader valve and fuel came out. Also gauge reads 38 psi. I havent started the car in six years, the gas is six years old and car has a half tank. After six years can the gas go bad and not allow the car to start.
When trying to start the car it will back fire not out the exhaust but like near the header. Im frustrated like f***. I searched about the ground strap from the engine to the frame, I do not have one will this cause the engine not to start.
Please help.
later
Orlie
When trying to start the car it will back fire not out the exhaust but like near the header. Im frustrated like f***. I searched about the ground strap from the engine to the frame, I do not have one will this cause the engine not to start.
Please help.
later
Orlie