4.6 2v

I was driving down the highway in my 2002 mustang gt (138k miles) on my way to work when all of the sudden my car lost power. The car cycled on and off very quickly and i was able to drive home. I put the car neutral and let it sit for about an hour. When i tried to start the car again there was...

Hey everyone I'm looking into super charging my 97 gt and wondering if anyone can recommend a good and cost effective company to buy one from. Also if you have any advice or tips as to what to get where etc. Please comment. I currently have a CAI, cat delete, x pipe, and flow master mufflers.

I have a 2000 mustang GT with a pypes offroad h-pipe. I want to get longtubes but pype's does not sell longtubes on AM or LMR. I did some research to see if my midpipe will fit longubes such as bbk or mac since my midpipe bolts on to the stock manifold; however, they say that you need a shorty...

Hi I have a 1997 GT and I decided to do a PI intake swap and the gaskets needed no modding and the intake sat perfect but I noticed that the non Pi intake I took off, the gaskets didn't line up correctly and we're actually partially in the intake holes. Is this a clear representation that I have...

Hi, I have a completely stock 2003 Mustang GT 4.6. I have three local exhaust opportunities each at $100 1: Stock system just replacing mufflers with Borla Bullet Style mufflers 2: Stock system with Flowmaster Super 44 mufflers 3: BBK Offroad X pipe 2.5” with Dynomax Super Turbos I’m looking...

Hi. I have been having some issues with my 96 GT. It’s been running really rough. I checked out the codes on the computer. Given there was no check engine light on. Number of codes came back like P1101, P1124,P1116,P1151,P1132. As well as communication error with the ecu. The code was P0605...

What up Fellow Stang Owners! Bought my SN95 a few months ago from my neighbor. May as well have stolen it from them for what I paid. Either way, the car was half dead and barely running. I've done a decent amount on it thus far (tune up, coolant flush, oil change, & rear drums and brake pads)...

What’s up guys, i’m new to this forum so forgive me, but i really need help. So, story of the car, its a 2000 V6 mustabg, that I swapped to a 97 4.6. I bought the motor, did an overhaul, all new bottom end bearings, bolts, oil pump, rings, etc etc. Originally, when i built the motor, i had NPI...

Just got a 04 Gt and looking at doing some bolt-ons this winter. Gotta do something with the family this winter Wanting to do an off road h pipe, CAI, Under drive pulleys and Throttle body. But I also have to replace the clutch, all the light housings and repair a few little things. But...

So I came up on a 2000 GT convertible auto.. the price was right and I needed an engine for my 98 GT 5speed... I thought it was a simple swap but thinking about it I feel like I’m missing something.... first things first my 98 has the two coils the 00 has the coil on plug system, will this work...

Evening gents! New here, not to mustangs though. This is my first 4.6 car, been good up until the last couple of months, been seeing code p1409 egr system circuit malfunction pop up, and go out a few times on it’s own. Symptoms include; after the engine is warm, and at highway speed, if I am at...

Hey guys so I just did a 98 3.8 to a 97 4.6 swap and swapped everything but now I've ran into a issue I start the car and it starts up for a second but then dies, any ideas??

so I have a 2001 bullitt and I’m tired of the 2v so I’m looking to terminator swap it but I can’t seem to find a new terminator engine. Can someone point me in the direction on finding one please and thanks!

I have a 2002 GT with full catless exhaust, CAI, Throttle Body, and Tune. When i first fire up my car it has a jumpy idle and has even died on me a couple of times; the wierd part is, is that I can go down the road for half a block and stop and the idle is perfectly fine. It only does it as soon...

Hey guys, I was wondering what you could swap over from a 2008 manual 4.6 3-valve to a 2002 manual 4.6 2-valve. Recently was given a wrecked 3V with all mechanical functions still working. The main questions I have is, could I put the 08 transmission into my 02, they are both TR3650, But his...

Good evening how are you guys. I have a mustang gt 2004 and just replaced the gear on it because the old mechanic f****d up the gears when changing yhe seal. So i went to mustang magic in long island to change the gear and updated the gears to 3.73 rather than 3.27 stock. So the new gears are...

Hi All, I have a 2002 Ford Mustang that I bought a few months ago. It has been running great, haven't done much of anything to the car. I travel for work, and before I left two weeks ago, it was running very well. I get back, and drive to the gas station, and she throws a P0304 and P0316...

Hi guys! So the car: 04 mustang GT vortech V-2 with a 2.7in pulley Heads: Trickflow 44cc 2v Custom cams Bullet Cams: I can get numbers if it matters Cobra crank and pistons 8 rib serpentine belt Heavy duty A2W intercooler, I do not have heat issues( can go into this if it matters). Fuel twin...