Search results

  1. B

    Steering and Suspension

    I just did a lot of upgrades to my motor and just changed to 3:80 gears with trac lock posi... Now that i have done those things i still have not been able to really feel the power i have added because of my suspension. I have purchased traction bars that I have not put on yet but what else...
  2. B

    Steering problem

    I could be at a dead stop and if i stomp on the gas my steering wheel jerks to the right and if i start to let off the gas i can feel the steering jerk back to the left to straighten the steering wheel. It also does this on the freeway if i am cruising and punch the gas which is very scary...
  3. B

    Which 8" posi unit should i get?

    Ok right now i am in the process of trying to figure out which posi unit i should get for mustang. I have a 8" rear and have noticed it is not a lot for me to choose from. Right now i am trying to figure out the difference between the "ford traction lock trac loc posi unit" and the Powertrax...
  4. B

    Master cylinder went out

    My master cylinder on my car went out and now my brake pedal goes down to the floor after being pressed for a while. I am looking for a new one, but i noticed that mine has a spot for 2 wires to connect from the firewall harness. What are these wires and are they needed? Here is a pic of how it...
  5. B

    Front suspension problems

    I am having front end suspension problems. When im on the freeway at high speeds and hit a bump car swerves. My steering also seems really loose, where as i speed up sometimes the wheel turns as if the alignment is off, but the car is still moving straight. What are somethings i can do to fix...
  6. B

    Will 18x8 rims fit in the front on 1964 1/2 ford mustang

    I am shopping for some more rims and i wanted to know if anyone knows if a 18x8 rim will fit on the front of a 1964 1/2 Ford Mustang. The rims i am looking into are the Boss 338 which is a 18x8 rim with 2mm offset and 4.5 backspace. Also if anyone has any pics of 18" rims on there car that would...
  7. B

    1968 Ford Mustang rallys w/ tires for sale

    I am selling a set of 1968 Mustang rallys with tires. The rallys are in good condition and the tires have about 85% tread. If interested send me your information so we can see how much shipping would be if you are not local.
  8. B

    Front suspension problems

    Right now my front suspension is horrible. Right now if i am on the freeway and go over 90 the car starts to dance on the freeway especially if i hit a bump. What are some must need upgrades that i need to do and what brand do you recommend?
  9. B

    Im getting code 95

    I am getting code 95 when I am running the codes on my mustang. Code 95 list as "fuel pump secondary circuit fault". What can I do to fix this?
  10. B

    Error codes

    Right now I am having problems with my car... Right now i can not go over 3500 rpms... When i reach that it starts to tach out... I ran my codes with the key in the on position and 81,82,85,84,22,33 and 95 came up. I also ran the codes with the car running and 33,94 and 44 came up. I know some...
  11. B

    Could my msd 6AL box be the problem????

    I have a 1991 H.O motor with aluminum heads, longtube headers, F303 cam, typhoon upper and lower intake, and msd (dizzy,coil,6AL box) and 5speed transmission. For some reason i can not go past 3500 rpms, what could be the cause of this and what can I do to fix this problem? I just replaced my...
  12. B

    RPM range problem

    I have a 1991 H.O motor with aluminum heads, longtube headers, F303 cam, typhoon upper and lower intake, and msd (dizzy,coil,6AL box) and 5speed transmission. For some reason i can not go past 3500 rpms, what could be the cause of this and what can I do to fix this problem?
  13. B

    Car doesnt go past 3,500RPM

    I have a 5.0 H.O. motor from a 1991 mustang. F303 cam, aluminum heads, 1.7 rockers, typhoon upper and lower intake and 5speed. For some reason my rpms do not go past 3500 while driving. what could be the cause of this?
  14. B

    Car not cranking

    I tried starting my car and it would not start. I bought a code reader and ran the codes from the computer and the code 43 and 63 came up. Does anyone know why these codes would come up and what i can do to fix this problem???
  15. B

    injectors seem to not be getting fuel to them?????

    Ok i dont know if this could be caused by a vacuum leak or not, but what would stop fuel from getting to the injectors? I checked the little checker on the rail that is near the valve cover and fuel came out there but i think fuel might not be getting to the injectors.. after messing with the...
  16. B

    Adjustable crane rocker arm problems

    Ok i am having a problem. I started my car and noticed a ticking noise under the valve cover. So i took it off and noticed that 2 of my rockers had came off/loosened. I tried tightening them and started the car and the same 2 did the same thing again. I am wonderin what could this be? Why are...
  17. B

    Timing is off!!!

    I am having problem with my timing. I did a efi conversion in my 64 1/2 mustang and im trying to get my timing right. From the sound of it right now i can tell that the timing is off a little but can anyone show many articles or pics,etc on how to fix the timing. Here is a link to a video of...
  18. B

    1964 1/2 Mustang Starter Solenoid

    I just did a efi swap on my 1964 1/2 Mustang and when it was time for me to start the car the starter solenoid started smoking and i guess eventually went out. Now when I try to start the car it is just a clicking noise. I am going to take the starter off and get it tested and I just ordered...
  19. B

    12 volt source in start & crank position

    I am doing a efi swap in my 1964 1/2 Mustang and I am having problems with finding a source that gives 12 volts in both the start and crank position.I was trying to use a ignition wire that was hooked up to a stereo but in the crank position it loses voltage. Would I maybe have to tap into the...
  20. B

    0 compression

    I have zero compression on my motor right now. What are the top things that i need to check? Oh by the way someone did some motor work on the car such as cam, new rockers and pushrods. Could it be because the pushrods are not long enough or too long? or maybe rockers are down too tight?
Top Bottom
Back
Forums
Menu